Instruction manual

2 4 Power Wiring
The controller can operate at 11-26 VAC / VDC or 90-264VAC.Check
that the installation voltage corresponds with the power rating indicated on the
product label before connecting power to the controller.
The controller can operate at 11-26 VAC / VDC or 90-264VAC.Check
that the installation voltage corresponds with the power rating indicated on the
product label before connecting power to the controller.
90 264 VAC or
11 26 VAC / VDC
~
~
Fuse
Figure 2.4
Power Supply Connections
Figure 2.4
Power Supply Connections
This equipment is designed for installation in an enclosure that will provide
adequate protection against electric shock. The enclosure must be connected
to earth ground.
Local requirements regarding electrical installation should be rigidly observed.
Consideration should be given to prevent unauthorized persons access to
the power terminals.
This equipment is designed for installation in an enclosure that will provide
adequate protection against electric shock. The enclosure must be connected
to earth ground.
Local requirements regarding electrical installation should be rigidly observed.
Consideration should be given to prevent unauthorized persons access to
the power terminals.
12
34
5
8910
11
67
12
13
14