Instruction manual

3 3 Rearrange User Menu3 3 Rearrange User Menu
3 4 Display SV Instead of PV3 4 Display SV Instead of PV
The ETR-3400 has the flexibility to provide selection of User Parameters which
are most significant to your process. These parameters are placed in front of the
display sequence.
The ETR-3400 has the flexibility to provide selection of User Parameters which
are
most significant to your process. These parameters are placed in front of the
display
sequence.
SEL1
SEL2
SEL3
SEL4
SEL5
: Selects the most significant parameter for view and change.
: Selects the 2'nd significant parameter for view and change.
: Selects the 3'rd significant parameter for view and change.
: Selects the 4'th significant parameter for view and change.
: Selects the 5'th significant parameter for view and change.
NONE, TIME, A1.SP, A1.DV, A2.SP, A2.DV, RAMP, OFST,
REFC, SHIF, PB1, TI1, TD1, C.PB, SP2, PB2, TI2, TD2
When using the up-down key to select the parameters, you may not obtain
all of the above parameters. The number of visible parameters is dependent
on the setup condition. The hidden parameters for the specific application are
also deleted from the SEL selection.
Range :
SEL1
SEL2
SEL3
SEL4
SEL5
:
Selects the most significant parameter for view and change.
:
Selects the 2'nd significant parameter for view and change.
:
Selects the 3'rd significant parameter for view and change.
:
Selects the 4'th significant parameter for view and change.
:
Selects the 5'th significant parameter for view and change.
NONE,
TIME, A1.SP, A1.DV, A2.SP, A2.DV, RAMP, OFST,
REFC,
SHIF, PB1, TI1, TD1, C.PB, SP2, PB2, TI2, TD2
When
using the up-down key to select the parameters, you may not obtain
all
of the above parameters. The number of visible parameters is dependent
on
the setup condition. The hidden parameters for the specific application are
also
deleted from the SEL selection.
Range
:
SEL1
SEL2
SEL3
SEL4
SEL5
Example :
Example :
A1FN selects TIMR
A2FN selects DE.HI
PB1=10
TI1 = 0
SEL1 selects TIME
SEL2 selects A2.DV
SEL3 selects OFST
SEL4 selects PB1
SEL5 selects NONE
Now, the upper display scrolling becomes :
A1FN selects TIMR
A2FN
selects DE.HI
PB1
= 10
TI1
= 0
SEL1
selects TIME
SEL2
selects A2.DV
SEL3
selects OFST
SEL4
selects PB1
SEL5
selects NONE
Now,
the upper display scrolling becomes :
PV
42
In certain applications where set point value (SV) is more important than
process value (PV) for the user, the parameter ( display format ) then
can be used to achieve this purpose.
Press keys to enter setup menu , then press several
times until appears on the display. If you need the process value to
be displayed, then select by using or key for DISF, If you
need set point value instead of process value to be displayed, then select
for DISF. Also refer to the flow chart in to see the
location of DISF.
DISF
Section 1-5
In certain applications where set point value (SV) is more important than
process value (PV) for the user, the parameter ( display format ) then
can be used to achieve this purpose.
Press keys to enter setup menu , then press several
times until appears on the display. If you need the process value to
be displayed, then select by using or key for DISF, If you
need set point value instead of process value to be displayed, then select
for DISF. Also refer to the flow chart in to see the
location of DISF.
DISF
Section 1-5
DISF
has two values:
Display process
value
Display set point
value