System information

Port Traffic Controls
All-Traffic Rate-Limiting for the 5300xl, 3400cl and 6400cl Switches
For example, if you wanted to view the rate-limiting configuration on the first
six ports in the module in slot “B”:
Ports B2-B5 are configured with an ICMP
rate limit of 1%. (Ports B1 and B6 are not
configured for ICMP rate-limiting.)
Figure 14-4. Example of Listing the Rate-Limit Configuration
The show running command displays the currently applied setting for any
interfaces in the switch configured for ICMP rate limiting. The show config
command displays this information for the configuration currently stored in
the startup-config file. (Note that configuration changes performed with the
CLI, but not followed by a write mem command do not appear in the startup-
config file.)
14-15