System information

MAC Address Management
Determining MAC Addresses
(The above command is not case-sensitive.)
For example, with a 4-port module in slot A of a 5304xl switch, a 24-port
module in slot B, and four nondefault VLANs configured:
ifPhysAddress.381, 431 Physical addresses for
456, and 481 non-default VLANs configured
on the switch. On the switches
covered by this guide, all VLANs
use the same MAC address
as the Default VLAN. Refer to
“Multiple VLAN
Considerations” in the “Static
Virtual LANs (VLANs)” chapter
of the AdvancedTraffic
Management Guide for your
switch.
ifPhysAddress.1 - 4: Ports A1 - A4 in Slot A
(Addresses 5 - 24 in slot A are unused, and addresses
25 and 26 are reserved.)
ifPhysAddress.27 - 50: Ports B1 - B24 in Slot B
(Addresses 51 - 52 in slot B are reserved.)
ifPhysAddress.282 Base MAC Address (MAC
Address for default VLAN;
VID = 1)
Figure D-2. Example of Port MAC Address Assignments on a Series 5300xl Switch
D-6