RTS HULPLYN Geagte klient indien u enige probleme ondervind, skakel gerus die volgende telefoon nommer: 086100 2525 Tussen 08H00 en 17H00 weeksdae Ons sal u met graagte te hulp wees U radio is soos volg geprogrammeer: Kanaal 1-8 met PMR 446 Kanaal 9-77 met LPD Kanaal 81-85 met SA se LFK m.a.
Dankie vir u ondersteuning! Baie geluk met die aankoop van die DV-3400 handradio! Die DV -3400 draagbare radio is maklik om te gebruik en dit is ‘n kragtige radio wat u van uitstekende kwaliteit verseker. Voor u hierdie radio gebruik, lees asseblief die handleiding deur om te verseker dat u weet wat om te verwag van u radio, en hoe om die radio ten volle te gebruik, asook die moets en moennies van die produk.
Veligheidsmaatreëls Die DV-3400 handradio is uitstekend ontwerp met gevorderde tegnologie. Om beserings en beskadiging van u radio te voorkom, let asseblief op na die volgende: 1.Hou hierdie handradio en toebehore weg van kinders af. 2.Moet asseblief nie self poog om aan die radio te peuter of veranderinge te maak sonder toestemming nie. ‘n Nie-proffesionele persoon mag skade aan die radio veroorsaak. 3.Gebruik asseblief die voorgeskewe battery herlaaier en battery om skade aan die radio te voorkom. 4.
Handleiding toegepas aan: DV-3400 UHF FM Handradio VHF FM Handradio Programmering Sagteware: QPS3400 NOTA: Wanneer die handstel geprogrammeer word, moet die oorspronklike fabrieksdata eers gelees word, alvorens die frekwensie ens. oorgeskryf word, andersins kan daar probleme onstaan a.g.v die verskillende frekwensie bande ens.
INHOUD UITEENSETTING................................................................................01 Bybehore Voorsien.......................................................................................... 01 STANDAARD BYBEHORE/OPSIONELE BYBEHORE..................... 02 Standaard Bybehore........................................................................................ 02 Opsionele Bybehore........................................................................................
INHOUD CTCSS/DCS Enkodeerder/Dekodeer Setup................................................... 17 Modus Selektering........................................................................................... 17 FM Radio......................................................................................................... 18 “Beep” Stem aankondiger................................................................................ 18 “Squelch” Vlak Opstelling.....................................................
UITEENSETTING Pak die handradio uit. Ons stel voor dat u die volgende items identifiseer wat gelys is in die table voor u die verpakkingsmateriaal weggooi. As daar enige items vermis of beskadig is gedurende vervoer, handelaar skakel.
STANDAARD BYBEHORE/OPSIONELE BYBEHORE Standaard Bybehore Antenna * QA07V(136-174MHZ) QA07U(400-480MHZ) etc. Belt Knip BC06 Li-ion Battery Pak (1300mAh) QB-33L Motorlaaier CPL-02 Laaier QBC-33L AC “Adaptor” (12V/500mA) QPS-05 Handleiding Nota: Om die frekwensie of band van die antenna te bekom, moet u asseblief na die etiket onderaan die antenna verwys.
BATTERY INFORMASIE Herlaai van die batterypak Die batterypak word nie by die fabriek gelaai nie, dus moet u die battery laai voor dit gebruik word. As die battery na gebruik of vir ‘n lang tyd gebêre word (vir meer as 2 maande) en dan eers herlaai word, sal die battery nie sy volle kapasiteit kan bereik nie. Nadat ‘n volle herlaai en afloop siklus deurgegaan is sal die radio op sy beste kan werk. Let ook daarop die battery se uitset vermoë sal afneem na ‘n tyd, al word die battery vol en reg herlaai.
BATTERY INFORMASIE Moet nooit die battery laai wanneer die battery klam is nie, maak dit eers droog. WAARSKUWING: As sleutels, kettintjies of ander elektriese metale in kontak met die battery se terminale kom, mag dit skade of beserings veroorsaak. Wanneer die terminale ‘n kortsluiting maak, kan dit baie hitte veroorsaak. Wees asseblief versigtig as u die radio aan u dra of gebruik. Bêre asseblief die radio in ‘n geisoleerde houer. Moenie in ‘n staal houer bêre nie. Hoe om die battery te stoor 1.
BATTERY INFORMASIE Herlaai aanwysing - Groen liggie brand wanneer battery volgelaai is. Werkende aanwyser Herlaaier aanwyser Herlaai van Handstel Herlaai van battery 3. Prop die Li-ion battery alleen of op die radio gekoppel saam in die voorgeskrewe herlaaier. * Maak seker dat die battery korrrek op die laaier geplaas is. Laaier se liggie sal - ROOI - vertoon. 4. Die rooi liggie sal na GROEN verander as die battery vol gelaai is. NEEM KENNIS: Dit neem ongeveer 4 ure vir die battery om vol te laai.
BATTERY INFORMASIE Installering en verwydering van battery ■Installering van battery: Pas hierdie volgende riglyne toe deur na die gidse agterop die radio te verwys, druk die battery na bo tot die battery perfek op die radio pas. ■Verwydering van battery pak: Skuif die battery se hakkie soos met pyltjie aangedui, verwyder die battery deur die battery uit te skuif.
BATTERY INFORMASIE Installering en verwydering van belt knip ■Installering van die Beltknip: Spasieër die belt knip in die ooreenstemmende groefies op die agterkand van die handstel, skroef dan kloksgewys vas. ■Verwydering van beltknip: Draai die skroefies los om die beltknip te verwyder. Installering van die luidspreker en mikrofoon (Opsioneel) Maak die MIC-SP klappie oop en sit dan die luidspreker/mikrofoon in die MIC-SP gaatjie.
BEKENDSTELLING LCD Skerm Op die skerm is daar klein beeldings van al die opsionele funksies . Uitstuur krag VOX Noue Band Stem Kompander Uitstuur Sluit van sleutelbord Battery kapasiteit DCS CTCSS FM Radio Kode frekwensie Kode Groepering/Funksie wyser wanneer gestel word/VFO Frekwensie Battery kapasiteit aanwyser (Vol) Batterykrag laag, verander battery of herlaai.
BEKENDSTELLING 1 2 3 4 5 10 6 7 11 12 9 8 9
BEKENDSTELLING 1.Antenna 2.Aan/Af skakelaar: Draai hierdie skakelaar kloksgewys om die handstel aan te skakel. Nadat die handstel aangeskakel is, draai dan die skakelaar kloksgewys en antiklokgsgewys om die volume op of af te stel. Om af te skakel, draai die skakelaar anti-kloksgewys totdat ‘n “ka” geluid gehoor word 3.Flitslig: Terwyl die handstel aangeskakel is, druk die Nood Alarm sleutel vinnig om die flitslig aan te skakel. Druk weer dieselfde knoppie vinnig om die flitslig af te skakel. 4.
BEKENDSTELLING Agtergrondlig Status & stem aankondiger Lae krag waarskuwing Handstel sal tydens lae krag uitset ‘n luitoon deurstuur met 60 sekonde tussenposes, die rooi lig sal ook flikker. Uitsending Agtergrond lig ( LCD) sal aan wees. Sleutelbord uitvoeringe Handstel sal ‘n “DU” geluid maak wanneer ‘n funksie ingetik word in die tabel van opsies, ‘n "DU DU" geluid sal gehoor word as uit enige funksie gaan.
BASIESE UITVOERINGS Aan/Af skakel van Handstel Aanskakel van handstel: Terwyl die radio afgeskakel is, draai die KRAG/VOLUME skakelaar totdat daar ‘n “klik geluid gehoor word. ‘n Stem sal “Power on” aankondig asook die huidige kanaal. Afsit van die handstel: Wanneer die handstel aan is, draai die KRAG/VOLUME anti-kloksgewys totdat ‘n “klik” geluid gehoor word. Die handstel is nou afgeskakel.
BASIESE UITVOERINGS Verstelling van frekwensie Terwyl die radio in die VFO frekwensie mode is, druk die knoppie herhaaldelik tot die desimale kolletjie flikker. Terwyl dit in hierdie mode is druk die / knoppie om die frekwensie te stel. Druk dan die knoppie om die frekwensie op te stel met 1MHz, om dit af te stel druk die met 1Mhz.
BASIESE UITVOERINGS sleutel behalwe, om jou kanaal nommer vas te stel en uit hierdie mode te gaan. Nadat op die opstellings mode ingegaan is en die frekwensie is nie vasgestel nadat daar uit hierdie modus gegaan is nie, sal die handstel self uit hierdie mode gaan na 10 sekondes. NEEM KENNIS: Wanneer die kanaal gestel word, sal die radio outomaties ongeprogrammeerde kanale oorslaan. Ontvang As op die huidige kanaal geroep word, sal die agtergrond lig verhelder, en jy kan dan die persoon hoor praat.
BASIESE UITVOERINGS Alarm Funksie Druk hierdie knoppie vir net meer as 3 sekondes om die Alarm Funksie aan te sit. Wanneer hierdie funksie aangesit is, sal die radio dit aankondig met ‘n luitoon. Dit sal dan die alarm uitstuur aan gekose persone of sisteme. Skakel die handstel aan en af om hierdie funksie af te skakel. NEEM KENNIS: Fabriek opstellings: Algemeen. Hierdie funksie kan aangesit word deur prorgammering.
FUNKSIE OPSTELLING Basiese Funksie Opstelling 1. Druk hierdie sleutel herhaaldelik om die sub-tabel op te stel. 2. Druk / om die funksie waarde op te stel. 3. Druk [PF1] of [PF2] om die instellings te bêre en uit te gaan. CTCSS/DCS Enkodeer / Dekodeer Wanneer die radio gewysig word met hierdie funksie, sal die radio slegs, wanneer daar CTCSS/DCS seine ontvang word, die ander party hoor roep. Radios met ooreenstemmende CTCSS/DCS opstellings sal jou roep kan hoor. Tot ‘n "UF" ikoon op die 1.
FUNKSIE OPSTELLING CTCSS/DCS Enkoderer/Dekodeer Instelling 1.Druk herhaaldelik die sleutel totdat die CT/DT en die CTCSS/ DCS flikker op die LCD skerm verskyn. 2.Druk die / herhaaldelik om die gekose CTCSS/DCS te dekodeer. CTCSS: 67-254.1H, totaal 50 groepe. “Default”:67HZ. DCS: 017N-765I, totaal 232 groepe. "N" op die LCD beteken ‘n positiewe kode. "I" op die LCD skerm beteken ‘n inverse kode. “Default”: 017N 3.Druk [PF1] of [PF2] om die opstellings te bêre en terug te gaan na die bystand mode.
FUNKSIE OPSTELLING NEEM KENNIS: Die VFO Aan/Af funksie word met sagteware opgestel. FM Radio 1.Druk herhaaldelik totdat “FM” flikker. / om die FM funksie stel. 2.Druk ON: Sit die FM radio aan. OFF: Sit die FM radio af (of skakel die handstel af.) 3.Druk [PF1] of [PF2]. NEEM KENNIS: Wanneer die FM funksie aan is druk om deur die / stasies te skandeer. Dit sal ook die huidige kanaal nommer aankondig. Wanneer ‘n radio stasie opgetel word, sal dit ophou skandeer.
FUNKSIE OPSTELLING “ Squelch” vlak opstelling Hierdie funksie word gebruik om die ontvangsintesiteit te verstel. As die ontvangsintensiteit ‘n sekere vlak bereik, kan jy die ander party se roep ontvang, andersins sal die radio geen klank ontvang nie. herhaaldelik totdat "SQ" flikker. 1.Druk / : Stel die “squelch” vlak 2.Druk Totaal van 10 opsies vir hierdie vlak:: AF, 1-9 grade 3.Druk [PF1] of [PF2] om uit te gaan. NEEM KENNIS: Hierdie funksie kan slegs deur programmering opgestel word.
FUNKSIE OPSTELLING VOX Vlak Opstelling Hierdie funksie word gebruik om die volume te stel wat nodig is om uitsending te laat plaasvind. Hoe hoër die vlak van die VOX gestel is, hoe hoër moet die stemtoon wees. herhaaldelik totdat "VOX" en die huidige VOX vlak flikker. 1.Druk 2.Druk of om die vlak van die VOX te stel. 9 vlakke vir die opsie: 1-9 vlakke 3.Druk [PF1] of [PF2] verandering te aanvaar. Neem kennis: VOX vlakke kan slegs deur programmering opgestel word.
GEVORDERDE UITVOERINGS “Squelch” Af Terwyl die radio aangeskakel is, druk die geprogrammeerde “squelch” af [PF1] / [PF2] knoppie, die “squelch” kanaal is nie af nie, en jy kan dan die agtergrond geluide hoor. Druk hierdie sleutel weer, die “squelch” kanaal sal dan af wees. Deur hierdie funksie te gebruik, sny u die swakker seine uit. Die skerm sal die huidige kanaal intensiteit wys. Monitor Druk die geprogrammeerde sleutel van Monitor [PF1] / [PF2], die radio sal 'n "Du" geluid maak, monitor is nou aan.
GEVORDERDE UITVOERINGS Skandeer Die skandeer funksie kan gebruik word om elke kanaal te moniteer. Onder die stand op die geprogrammeerde "Skandeer" sleutel, sal die radio ‘n "Du" geluid maak en in die skandeer mode wees. Dit skandeer die kanale in die lys een vir een. Wanneer die radio 'n ooreenstemmende sein ontvang , sal die radio tydelik in die kanaal bly totdat die sein verdwyn.
GEVORDERDE UITVOERINGS + lui (koord 1) as oproep gemis is sal ‘n deuntjie jou laat weet. Neem kennis: Die handstel se vibrasie funksie is opsioneel. Wanneer daar geen vibrasie funksie is nie, is slegs die luitoon beskikbaar vir die in kennis stelling van oproep. Tydelike verwydering van kanaal wat inmeng Hierdie funksie kan tydelik die kanaal wat inmeng of kanaal wat beset is van die skanderingslys verwyder.
GEVORDERDE UITVOERINGS Skandering van kanaal lys Via programmering sagteware, kan gebruikers kies of hul die huidige kanaal wat skandeer word wil byvoeg. As die huidige kanaal nie in die lys van skandering is nie, sal die kanaal sal oorgeslaan word tydens die skandeer proses Uitsaai tydhouer (TOT) Die doel van die Uitsaai Tydhouer is om te keer dat enige inbeller 'n kanaal vir ‘n te lang tydperk besig hou. .
AGTERGROND UITVOERINGS Prioriteits Skandering Daar is twee prioriteit-kanaal instellings vir hierdie radio, ‘n "vaste" en "gekose" instelling. Gebruikers kan die gewenste prioriteit skandering stel deur sagteware programmering. As die radio op prioriteit skandeer, en die handstel ontvang geen oproep nie, sal die radio elke kanaal skandeer en ook die prioriteits-kanaal toets.
TEGNIESE SPESIFIKASIES Frekwensie Algmeen UHF: 400-480MHZ VHF: 136-174MHZ Kanaal Kapasiteit 128 kanale Kanaal spasieering 25KHz (Wye Band) 12.5KHz (Noue Band) Geslote fase- stap 5KHz, 6.25KHz Uitvoerende spanning 7.4 DC ±20% Batterylewe Meer as 12 Hours (1300mAh), by 5-5-90 Frekwensie stabiliteit ±2.
TEGNIESE SPESIFIKASIES Uitstuur gedeelte Wye band Krag uitset Noue band 5W/1W Modulasie 16KΦF3E 11KΦF3E Ooreenstemmende kanaal ≥65dB ≥65dB ≥40dB “Hum” & Geraas ≥48dB Ongegronde Werping ≤-36dB ≤-36dB Klank Sensitiwiteit 6dB / per interval 6dB / per interval Klank Distorsie ≤5% 27
PROBLEEMOPLOSSINGSGIDS Problem Geen krag. Battery gaan dood kort na battery op die regte manier herlaai is. Corrective Action A.Die batterypak mag uitgeput wees. Herlaai of vervang die battery. B.Battery pak kan dalk nie reg ingesit wees. Verwyder die battery pak en sit dit weer terug. C.Die krag skakelaar kan foutief wees; stuur na handelaar vir herstel. D.Battery se skakels kan foutief wees, stuur na naaste handelaar vir herstel. Die batterypak se lewensduur is verby. Vervang die batterypak.
PROBLEEMOPLOSSINGSGIDS Kan nie ander persone hoor of met hul praat via die handstel nie. Kan nie die radio aan of afskakel nie. Die ander party ontvang lae of gebroke boodskappe. A.Verskillende frekwensie of kanaal, verander die kanaal. B. Verskillende CTCSS/DCS, herprogrammeer. C. Buite die Kommunikasie reikafstand. Maak seker dat die battery kontak maak . Maak seker die luidspreker is nie geblokkeer nie. Neem na u naaste handelaar vir reparasies.
GRAFIEKE CTCSS Frekwensie Grafiek 1 2 3 4 5 6 7 8 9 10 11 30 67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 12 13 14 15 16 17 18 19 20 21 22 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 23 24 25 26 27 28 29 30 31 32 33 141.3 146.2 151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8 177.3 34 35 36 37 38 39 40 41 42 43 44 179.9 183.5 186.2 189.9 192.8 196.6 199.5 203.5 206.5 210.7 218.1 45 46 47 48 49 50 225.7 229.1 233.6 241.8 250.3 254.
GRAFIEKE DCS Grafiek 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 017 023 025 026 031 032 036 043 047 050 051 053 054 055 065 071 072 073 074 114 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 115 116 122 125 131 132 134 135 143 145 152 155 156 162 165 172 174 205 212 217 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 223 225 226 243 244 245 246 251 252 254 255 261 263 265 266 271 274 305 306 311 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 315 81 325 82
THANK YOU! Thank you very much for choosing our transceiver. transceiver provides you with reliable, clear and efficient communication service. Our DV-3400 introduces innovative DSP (Digital Signal Processing) baseband technique to achieve highfidelity voice processing. DV-3400 a compact and fashionable transceiver that allows you to enjoy instant communication at ease. The features like novelty, nice timbre, high power (>5W), make DV-3400 a high cost-effective professional transceiver.
SAFETY INFORMATION FOR USER transceiver is excellently designed with advanced technology. Please observe the following precautions to perform your obligation, prevent personal injury and ensure the safety of transceiver usage. 1. Keep the transceiver and accessories away from children. 2. Please do not try to open or modify the transceiver without permission, unauthorised persons may damage the product. 3. Please use RTS orginal battery and charger to avoid damage. 4.
CONTENTS UNPACKING.......................................................................................01 Supplied Accessories...................................................................................... 01 STANDARD ACCESSORIES/OPTIONAL ACCESSORIES............... 02 Standard Accessories...................................................................................... 02 Optional Accessories.......................................................................................
CONTENTS CTCSS/DCS Encode/Decode ........................................................................ 17 CTCSS/DCS Encode/Decode Setup............................................................... 17 Mode Selection................................................................................................ 18 FM Radio ........................................................................................................ 18 Beep Voice Prompt...........................................................
UNPACKING Carefully unpack the transceiver. We recommend you identify the items listed in the table as bellows before discarding the packing material. If any items are missing or have been damaged during shipment, please contact local dealers immediately.
STANDARD ACCESSORIES /OPTIONAL ACCESSORIES Standard Accessories Antenna * QA07V(136-174MHZ) QA07U(400-480MHZ) etc. Belt Clip BC06 Li-ion Battery Pack)1300mAh QB-33L Car Charger CPL-02 Charger QBC-33L AC Adaptor (12V/500mA) QPS-05 Instruction Manual Note: For frequency band of antenna, please refer to label glued on the bottom of the antenna.
BATTERY INFORMATION Charging the Battery Pack The battery pack is not charged at the factory; please charge it before use. Charging the battery pack for the first time after purchase or extended storage (more than 2 moths) may not bring the battery pack to its normal operating capacity. After fully charging/ discharging cycle for two or three times, the operating capacity will reach its best performance.
BATTERY INFORMATION •• Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger. WARNING: When keys, ornamental chain or other electric metal make contact with the battery terminal, the battery may cause damage or hurt bodies. If the battery terminal short circuit it will generate a lot of heat, please be careful when you carry or use the battery, please put battery or radio into insulated container. Do not put it into metal container.
BATTERY INFORMATION Working Indicator Charging Indicator Transceiver Charge Battery Charge 111Plug the Li-ion battery or the transceiver installed with Li-ion battery into the matched charger. A. Make sure that the battery is well connected with charging connectors. Charging indicator---Red 222Fully charged. Charging indicator--Green. Note: It takes approximately 4 hours to fully charge the battery. But, the actual charging time depends on the battery.
PREPARATION Installing / Removing the Battery ■Installing the battery: Match the battery pack with the corresponding guides on the back of the transceiver, and push it upwards untill it is fully locked by the battery latch. ■Removing the battery pack: Slide up the battery latch and remove the pack away from the transceiver.
PREPARATION Installing / Removing the Belt Clip ■Installing the Belt Clip: Place the belt clip to the corresponding grooves on the back of the transceiver, and then turn the screw clockwise. ■Removing the Belt Clip: Anticlockwise turn the screws to remove the belt clip. Installing the Additional Speaker/ Microphone (Optional) Unveil the MIC-SP jack cover and then insert the Speaker/Microphone plug into MIC-SP jack. Note: The transceiver is not completely waterproof while using the Speaker/ Microphone.
GETTING ACQUAINTED LCD Display Screen On the screen, icons for the optional functions are displayed on the screen. It helps a lot when you forget the functions settings.
GETTING ACQUAINTED 1 2 3 4 5 10 6 7 11 12 9 8 9
GETTING ACQUAINTED 111Antenna 222POWER / VOLUME Switch: Turn clockwise to switch on the transceiver, and turn anticlockwise untill hearing "Ka" to switch off the transceiver. After switching on the transceiver, turn clockwise to increase the volume and anticlockwise to decrease the volume. 333Jacklight: under standby state, press this key to Emergency Alarm Key to power on the jacklight. Repeat same operation to turn off the light.
GETTING ACQUAINTED Backlight Status and Voice Prompt Warning on low voltage Receive Keypad operation Transceiver emits a low voltage beep at intervals of 60 seconds, and red light twinkles. Backlight lightens all the time Transceiver emits"DU" when entering a function menu, "DU DU" to exit any function.
AUXILIARY FUNCTIONS Users can setup the key [PF1] and PF2] to be one of the optional functions as follows: •• Squelch off •• Monitor •• Hi/Low Power switch •• Scan •• Frequency Reverse •• Talk around •• Current battery capacity enquiry •• Call •• Temporarily delete interrupting channel For better information on this part, please refer to the "Advanced Operation" instruction.
BASIC OPERATIONS Switch on / off the Transceiver Switch on the Transceiver: Under power-off state, turn POWER/ VOLUME knob clockwise till hearing "Click" to switch on the transceiver. The transceiver will announce "Power on" and current channel. Switch off the Transceiver: When the transceiver is in the open state, turn POWER / VOLUME anticlockwise untill hearing "Click" to switch off the transceiver. Switch on/off the Jacklight Under standby state, press the Emergency Alarm Key to switch on the jacklight.
BASIC OPERATIONS dot on the LCD twinkles. Under this state, press / to set desired current frequency. Press to increase the frequency value by step, to decrease the frequency value. Press [PF1] or [PF2] key to confirm the selected frequency and exit the frequency setting mode. After entering the setting mode, if users do not set the frequency or not exit the mode after adjusting the frequency, the transceiver will exit the setting mode automatically after 10seconds.
BASIC OPERATIONS need to press repeatedly untill the channel number displayed on the LCD twinkles, secondly, press or to up or down the channel number, and then the transceiver will announce the adjusted channel number. Press to downward the channel to upward the channel number and number. Press any key except , to confirm and exit.
BASIC OPERATIONS into microphone. Please keep around 2.5-5cm distance between microphone and your mouth. And please speak in normal tone to make the receiver obtain best tone quality. Note: Pressing and holding [PTT], if the backlight lightens for 10seconds and goes out afterwards and TX icon displayed on the LCD, the transceiver is transmitting. Release the PTT to receive. Emergency Alarm Function Press this key for over 3 second to start the Emergency Alarm Function.
FUNCTIONS SETUP Basic Functions Setup 1. Press repeatedly to select desired sub-menu to setup. 2. Press / to set desired function value. 3. Press [PF1] or [PF2] to save and exit. CTCSS/DCS Encode/Decode When the transceiver is edited with this function, only when CTCSS/DCS signaling is received can the transceiver hear the calling of the other party. Transceivers that have matched CTCSS/ DCS or do not setup with any signaling can hear your call.
FUNCTIONS SETUP 111Press / to select desired CTCSS/DCS decode. CTCSS: 67-254.1H, totally 50 groups. Default: 67HZ. DCS: 017N-765I, totally 232 groups. "N" on the LCD means positive code. "I" on the LCD means inverse code. Default: 017N 222Press [PF1] or [PF2] to save and back to standby state. NOTE: The icon "N" or "L" will hide when CTCSS/DCS encode/decode function is closed. Mode Selection There are two modes for option, VFO (frequency mode) and Channel mode.
FUNCTIONS SETUP OFF: turn off FM radio function (reset the transceiver when FM radio is on can also turn this function off) 333Press [PF1] or [PF2] to exit. NOTE: to search FM When FM radio function is on, press / radio station and announce current channel number. When a certain radio station is detected, the radio will rest on the station. The radio can transmit or receive when FM radio is on. Beep Voice Prompt 111Press repeatedly untill "BEP" on the LCD twinkles.
FUNCTIONS SETUP On/Off VOX When this function is enabled, you can begin transmitting by fitted high voice, no needing to press the [PTT] key. 111 Press repeatedly untill "VOX" on the LCD twinkles. 222Press / to on/off VOX function. ON: turn on VOX function OFF: turn off VOX function 333Press [PF1] or [PF2] to exit. NOTE: To manually set this function, users need to enable this function via programming software firstly, otherwise this option will hide.
FUNCTIONS SETUP channel mode. Under VFO mode, users can upward or downward the frequency by frequency step. 111Under standby state, Press repeatedly till "STP" icon and current value of frequency step are displayed on the LCD. 222Press / to select desired value. There are five options: 5k, 6.25k, 10k, 12.5k and 25k. 333Press [PF1] or [PF2] to exit. NOTE: This function is invalid under channel mode.
ADVANCE OPERATIONS [PF1] and [PF2] are programmable, which can realize certain functions as bellow via programming software. NOTE: To start the function programmed on the [PF1]-1s or [PF2]1s, users need to press and hold [PF1] or [PF2] untill the transceiver voice "DU" and then release. Repeat the above operation to turn off the programmed function.
ADVANCE OPERATIONS "H" icon on the LCD means high power. "L" icon on the LCD means low power 2. Scan Scan function can be used to monitor every channel. Under the standby state, pressing the programmed "Scan" key, transceiver emits "Du" beep and comes into scan state. It scans channels in scan list one by one. When one channel receives a matched signal, the transceiver temporarily stays in this channel untill the signal disappears.
ADVANCE OPERATIONS Note: Under the talk around state, the transceiver can not communicate with other transceivers via repeaters. Battery Capacity Enquiry Pressing the programmed "Battery Capacity Enquiry", the transceiver will announce current battery capacity. There are 10 grades in total. Grade 10th means full battery capacity. When the battery state is grade 1th(6.1V), the LED lights red. The transceiver will voice prompt users to charge timely and also enter automatically the state of no transmission.
BACKGROUND OPERATIONS Wide / Narrow Band Setup On the basis of national conditions, users can set channel spacing as 25K (wide band) or 12.5K (narrow band) to communicate on the transceiver by programming software. This transceiver can realize 25K (wide band), and 12.5K (narrow band) etc as communication way. NOTE: "N" on LCD indicates narrow band. Otherwise it is wide band. Busy Channel Lockout When BCL function is enabled, you can not transmit in busy channel.
BACKGROUND OPERATIONS using a channel for an extended period of time. If you continuously transmit for a period of time that exceeds the programmed time set in advance, the transceiver will stop transmitting with voice prompt. Users can set TOT timer by programming software. Time-Out Timer Pre-Alarm The Time-Out Timer Pre-Alarm is to alarm users that overtime transmission is pending. Users can program desired TOT Pre-Alarm time by programming software.
BACKGROUND OPERATIONS This transceiver is setup with different ways to return to appointed channel. Users can choose the desired way by programming software. NOTE: Users can set the basic and advanced operations via programming software.
Programming Software Installing & Starting (THIS INSTRUCTION TAKES WINDOWS XP AS AN EXAMPLE) 111Double-click "RTS3400 SETUP. EXE", and then install the software as per computer instructions. 222Click "START" menu, select and click "USB TO COMPORT" in the "RTS3400" program from "ALL PROGRAM"and then install the driver system of USB programming (picture 1) cable. 333Connect the optional cable PC03 to the USB port in PC device and connect the transceiver with the other end of cable.
Programming Software Installing & Starting (THIS INSTRUCTION TAKES WINDOWS XP AS AN EXAMPLE) Resume Factory Default Once transceiver works abnormally for wrong operations or wrong programming, users can start this function to resume all functions and channels as Factory Default. Press [PTT] and [PF1] key synchronously to switch on transceiver. Holding the two keys for more than 1 second, the transceiver will resume Factory Default after announcing current channel number.
TECHNICAL SPECIFICATIONS Frequency Range* Channel Capacity Channel Spacing Phase-locked Step Operating Voltage Battery Life Frequency Stability Operating Temperature Size Weight General UHF: 400-480MHZ VHF: 136-174MHZ 128 channels 25KHz (Wide Band) 12.5KHz (Narrow Band) 5KHz, 6.25KHz 7.4 DC ±20% More than 12 Hours (1300mAh), by 5-5-90 work cycle ±2.
TECHNICAL SPECIFICATIONS Transmitting Part Wide band Power Output Modulation 16KΦF3E Adjacent Channel Hum & Noise Spurious Emission Audio Response Audio Distortion ≥65dB ≥48dB ≤-36dB 6dB / per interval Narrow band 5W/1W 11KΦF3E ≥65dB ≥40dB ≤-36dB 6dB / per interval ≤5% Note: RTS reserves the right to amend specifications as needed for better performance.
TROUBLE SHOOTING GUIDE Problem No power. Battery power dies shortly after correctly charging. Transceiver cannot scan All band noisy after programmed or green light always lightens No sound after using radio for a while Communication distance becomes short, and it is low sensitivity Cannot talk to or hear other members in your group Corrective Action A.The battery pack may be exhausting. Recharge or replace the battery pack. B. The battery pack may not be installed correctly.
TROUBLE SHOOTING GUIDE Can not swich on or frequently swich-off The other party gets low or intermittent receiving audio Intermittent receiving with big noise. Loudspeaker become lower or with "ka ka" sound after using a certain time Receive audio from the other party but can not transmit Receiving indicating LED (green light) lightens but no sound Can not adjust channels 33 Check whether the battery contact is out of order or broken. Check weather the MIC is blocked.
ATTACHED CHART CTCSS Frequency Chart 1 2 3 4 5 6 7 8 9 10 11 67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 12 13 14 15 16 17 18 19 20 21 22 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 23 24 25 26 27 28 29 30 31 32 33 141.3 146.2 151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8 177.3 34 35 36 37 38 39 40 41 42 43 44 179.9 183.5 186.2 189.9 192.8 196.6 199.5 203.5 206.5 210.7 218.1 45 46 47 48 49 50 225.7 229.1 233.6 241.8 250.3 254.
ATTACHED CHART DCS Chart 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 017 023 025 026 031 032 036 043 047 050 051 053 054 055 065 071 072 073 074 114 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 115 116 122 125 131 132 134 135 143 145 152 155 156 162 165 172 174 205 212 217 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 223 225 226 243 244 245 246 251 252 254 255 261 263 265 266 271 274 305 306 311 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 315 81 32
A1.
