Operating Instructions

BTR-800, TR-800, TR-825 System Operation 65
Audio Output
The Audio Output screen allows the user to set the audio output
to Mono (Add) or Stereo (SEP). This option only applies to
beltpack with 5-pin headset connectors. Single-sided 5-pin
headsets will only receive A or B Audio depending on how the
headset is wired. Single-sided 5-pin headsets must set the audio
output to Ab SEP. The audio output option setting does nothing
with a 4-pin headset connector.
• Press [MENU] four times from the group/channels screen
to arrive at the audio output screen.
• Press [SET] to change the setting. The option will start to
flash.
• Use the [UP]/[DOWN] arrow buttons to change the audio
output option.
• Press [SET] to end editing and accept the setting.