TECHNICAL DATA PACKAGE TDP3504 IOIN 9300-3504-00 Third Edition ISeptember 1989 Rack Mount Speaker User Station O/N 9000-2727-00 TW INTERCOM SYSTEM RTS SYSTEMS A Telex Communications Company 1100 West Chestnut Street 1 Burbank, California 91506 I Phone 8181566-6700 / FSCM: 60572
TECHNICAL DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station PROPRIETARY NOTICE UNPACKING INFORMATION AND INSPECTION The information and design disclosed herein were originated by and are the property of RTS Systems. RTS Systems reserves all patent, proprietary design, manufacturing, reproduction, use and sales rights thereto, and to any article disclosed therein, except to the extent rights are expressly granted to others.
TECHNICAL DATA PACKAGE Model ~ ~ ~ TW 3 Intercom 0 0 System Rack Mount Speaker User Station RTS SYSTEMS' LIMITED WARRANTY RETURN SHIPPING INSTRUCTIONS The products of RTS Systems are warranted to be free from defects in materials and workmanship for a period of one year from the date of sale.
TECHNICAL DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station I ?W SYSTEM POWER SUPPLY I Figure 1-1 TW System Concept Block Diagram RTS Systems, Burbank, CA 91506 / FSCM: 60572 TDP3504 / Third Edition, Sept.
TECHNICAL DATA PACKAGE Model RMS3OO TW Intercom System Rack Mount Speaker User Station SECTION 1: DESCRIPTION & SPECIFICATIONS The Channel Selector Switch selects the channel on which the user will talk and listen. 1.1 DESCRIPTION The Model RMS300, a Rack Mount Speaker User Station, is a component used in the TW INTERCOM SYSTEM. Each User Station is a communications unit along a multi-unit conference bus.
TECHNICAL DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station LINE IN LINEIEX1 Figure 1-2 RMS300 Block Diagram RTS Systems, Burbank, CA 91506 / FSCM: 60572 TDP3504 / Third Edition, Sept.
TECHNICAL DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station 1.
TECHNICAL, DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station USER STATION SPECIFICATIONS Input DC voltage: 20 to 35 volts DC, operating from -200 to +36 volts DC without damage DC Current Quiescent, 10 to 40 milliamps 50 milliamps, typical (w/25 ohm headphones) 75 milliamps, typicall (w/25 ohm headphones + light) 100 milliamps, typical(w/8 ohm speaker Impedance across line: 10,000 ohms typical; Ambient Temperature Range Operating: 0 C to 60 6 Storage: -55 C to 125 6 Noise
TECHNICAL DATA PACKAGE Model RMS3OO TW Intercom System Rack Mount Speaker User Station r1 2 2 ELECTRICAL SECTION 2: INSTALLATION 22.1 Power 2.1 MECHANICAL INSTALLATION The RMS300 receives electrical power from either: The Model RMS300 mounts in an EIA standard 19inch equipment rack/enclosure, and is one rack unit high. Allow a minimum of 4 inches (101.6 mm) for the panel microphone and controls in front. Additional depth should be allowed for the cabling in the rear.
TECHNICAL DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station Use shielded cable to interconnect user stations in areas of possible electrical interference, (areas such as those near: digital equipment, high current primary power conductors ("mains"), transformers, transmitters, and lamp dimmers). cable connectors are lifted out of the mud or snow and protected with plastic bags. Water, mud and snow in connectors can cause considerable audible noise. 2.2.
TECHNICAL DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station This page intentionally blank RTS Systems, Burbank, CA 91506 / FSCM: 60572 TDP3504 / ~ h i r dEdition, Sept.
TECHNICAL DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station Figure 3-1 Model RMS'3OO Front Panel RTS Systems, Burbank, CA 91506 / FSCM: 60572 TDP3504 / Third Edition, Sept.
TECHNICAL DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station SECTION 3: OPERATION 3.1 Operating Controls (See Figure 3-1) Table 3-1 below lists the Model RMS300 operating controls. The reference numbers in Table 3-1correspond to the circled numbers in Figure 3-1. Table 3-1 Ref. No. - Name Descrivtion 1 Channel Select Switch Selects one of two channels (standard) or one of three channels (optional).
Installation. Local Power Option. RMS300 and SPK308 The RMS300 and SPK300 can be powered from an external (local) powes supply of between 18 to 33 volts DC, The local power option, a s supplied by RTS Systems uses a power supply assembly (RTS #9020-4425-OO), which is 117 VAC 60 Hz in, 24 VBC 400mA out To modify the RMS300 or SPK300 for local power operation: 1. Remove diode D26 from the CC3QO P. (2. beard. 2. Add J6, 4 pin jack (Calrad #38-454, RTS #2013-0005-001, to the back panel.
When a system is constructed using locally powered user stations, it is essential that all channels are terminated with a 200 ohm system termination. System terminations include: 1) An RTS Systems TW power supply*, 2) A discrete 200 ohm resistor for each locally supplied channel, 3) When application of a B.C. voltage is expected or possible, a 10 microfarad/ 50 volt capacitor in series with the 280 ohm resistor for each locally supplied channel. See diagram below.
TECHNICAL DATA PACKAGE Model RMS300 TW Intercom System Rack Mount Speaker User Station SECTION 4: DRAWINGS RTS Svstems Document Number Servicing Diagram, Light Signaling Circuit CC285 Servicing Diagram, Model RMS3001SPK300 Schematic Diagram, CC300, page 1 of 3 Schematic Diagram, CC300, page 2 of 3 Schematic Diagram, CC300, page 3 of 3 Wiring for External Microphones Wiring Diagram, pg. 1of 11 SPICJRMS300Standard -L Option and Local Power Option Wiring Diagram, pg.
FROM CHANNEL SELECT S W I T C H (CH.l) ,I . 8 E I DL-VI : OPTION NOTE: NOT FOR USE W I T H D L OPTION L_-________________----------------------- CH.1 H I CH.1 L O CH.2 H I CH.2 L O C H A S S I S GND O FROM CHANNEL SELECT S W I T C H (CH.2) 2 6 I N U N I T S W I T H C A L L L I G H T OPTIONS (-L). - M I C S W I T C H I S NOT INSTALLED. MOMENTARY II II O 2 5 FOR 3CH-DL OPTION: REMOVE W2 WHEN AUX. L I S T E N I S S E T TO MONITOR CHANNEL 1. REMOVE W 4 WHEN AUX.
I I 8 I 7 I 6 I 5 I 4 I l ~ e IvD ' e s c r i ~ t i o n 3 Zone SEE I 2 SHEET 1 l~ate ~ADD~V 2 I I I D D 1 - DYN M C I PRIM0 #DM-1532 OR PUSH-TO-TALK MICROPHONE BLACK w YELLOW BL.ACK SHEATH) R01 v o: EQUIV. - 1 SHIELD (WITH :I P4M 2.2K R02 TO USER S T A T I O N 4 2.2K C C SMALL - DYN MIC - SHIELD WHITE w -TO R01 USER RED CALRAD # l o - 8 0 OR PUSH-TO-TALK MICROPHONE EQUIV. OFF j 4 - P O ~ STATION 2.2K R02 0 I BLACK 2.2K B B - 4. THIS 3.
cc2e OPTlOlclAL ELECTRET MIL & 6 FOR LOLAL POWER OPf IOU : RElYlOVE 5 CUDS. Id MOVEL.5 . 8 Wir14 -L D%, ADD J6, AND WleE JL To P.L.6. AS SHOWN. OV'TlOd, 53 I 5 h l ~ &ED. r C U T AhJb SLEEVE W l E E INSTALL JUMPERS IN PLACE OF 7 5 Oh1 RMS-3GO S E R I E S ONLY. 3 ItJ5TAI-L JUMPER, 15 (RTS*~Z=-CXXG-OO) AND REMOM RIS ON 5%-309 SERIES OtJLY. 2 GOOSEUELIC MIC NOT USED ON SERIES, cur 4 SLEEVE WIPE. EUDS. I FOR MODELS WIT~OUT L I ~ H BoAeD, T CUT 4 SLEEVE WIRE ENDS.
\\ UI 1 -2 24 AWG TO I 0 PIN CONN 52 ( ~ c H ) lORN l YEL 2 VIO 2 GRY l ERN I RED RED MOUNTING NUT XLR-4 OPTIONAL GOOSENECK ELECTRET MIC MIC El IS A 3 m I T I O N TOGGLE SWITCH, C + K 7211 SPYABE FOR WE 3CH OPTION* M3DIFY M E STANDARD CC-300 RC. BOARD .AS FOLLOWS: CUT t TRACE LZ L3 4 I MOMENTARY LIGHT BOARD HEADSET MIC urnonamma- ou*.*M*IW Ioulu*ea-: -0cSy.YUI 5t m* . . . a 00*lllFIm . I ry.Iow.u UIW INSIALL JUMPERS IN PLACE OF T5 ON RMS -300 SERIES ONLY. I~~~ITALL.
8 I 7 6 1 4 5 I 3 ZONE J4 J3 'INPUT* AXR-3-31 D . . BLK 1 2 DATE DESCRIPTION REV. I "LOOP/EXT" AXR-3-32 REVISIONS I SCE SHEET I I APPROVE0 I D ~PERKER CUT \ Sl.E€V€ W\U€ E N D S TO J Z (ZUI) - ~ J ~ , P E -0 ~ S : ~ c C t j ~ r ~( ~; PC- ~L T _ ~ : Qb5, @ REMOVF R57 FOR -DL OPTION. @) R 3 \ CHhNGES FROM CbV. T O \ O K . @$ - R 2 4 CHANGES F R O M 220K 7 0 2211. @ R E M O V E J'JMP LR C . ' 3 ~-kr-i=.
1 2 1 i REYIIIK)NII mr* MV. ~ DAN MICIIYMI( H ~ E R EOV I S IR --..._Y-7tW_-84IZ:..--~ ~ RT5 CINE ( ~ C H ) RTS LINE ( ~ c H ) SPEAKER 3 CONN CUT t SLEEVE WIRE ENDS I ADD 5ARINK Fl T FOR I P7 ULRAD #30 -455 WHT .
XLR-4-32 . LOOP THRU/ EXT YSTEMS INC.. HURBANK. C \ 3 POSITICNJ L < K 7203SPYABE DUAL 5 D K A674MZIO (RT51L 1407- 0022-00) - ( RTS* 1903-0025-00) b JI A I Q 7 MOMEtJTARY MIL MOT USED ON UUITS WITH CALL L ~ h n OPTlotd l O (-I-').CUT 1 SLEEVE WIRE ENDS. @ CUT TRACES Q CUT T ~ A C E 0t.1 COMPO~.IE~JT SIDE (OUB PLACE). @ IdSTALL @ IlJSTALL ou CIRCUIT SIDE (TWO PLACES>. JUMPERS 1t.I PLACE OF 75 0k.
J3 J5 XLFE! REAR PANEL -. -... BLK I -* .. ULW , RTSU)I~;CH) BRN - J4 \ I ------- /h Fdi: PbZo&I?AMl INPUTOCOIN-)P:I A I SEE SHEET OIJE 1 . . I DUAL 5OK AUDIO (RTS # 1407-0022-00) R E M O V ~JUMPERS AT U 3 PIUS 5,6<7. FOR PROGRAM INPUT Cc) oPf10t.I : ADD cz(. I /50),clo(lmp~), cl0 (.ml/lCO), C Z B ( Z P ~ F > , C107$ LIOB(Z.
I REVISIONS DESCRIPm lN REV. ZONE i I SEE SHEl7 I DATE I .CUT $ SLEEVE W I R E ENDS 8. For Unmritched label information mic) seeon drawing RMSWBCS FDXXMC(Dual Usten. Programinput, end A FRoUT PANEL On RMS300 unlts a&:transformer T5 is not Installed. Add two 24 ewg red i jumpers in placeofT5 on bottom side of the board as shown. /3\ On SPK300 UnftSm installjumper across S1. InstalltrensformerT5 (RTS #23060006W), and remove resistor R15. Gooseneck mic not Installedon SPKW units.
1 CUT 3 2 .CH2 10 JI A A 26 PI^ LDNY FOR RHC OPTION (+M) ADD J 5 (XLR-4-31)BACK PANEL ERASE PROGRAM INPUT, LABEL "REMOTE HEADSET" WlRE TO THE FRONT PANEL A5 SHOWN. 5. FOR -USMB(S): a)ADD : T 4 (LM9003),C107 { C108 (10/50 ELECT RADIAL), QTY I JUMPER, CITY I BUS WIRE. b) BACK PAAJEC: ELIMINATE 'LOOP THRU* WIRES BETWEEN XLR-3-31 (RT5 LINE) AND d 4 (LOOP THRU).ERASE "LOOP" FROM BACK PANEL. ENGRAVE "USM'' INSTEAD. WIRE J4 A5 SHOWN.
GmSENECK OPTlOhlAL ELECTRET M I C MIL. AMACE UP 3 P T LOtJb CABLE AS SHOW^ ItJ "762-'L" "782-3"CISIN6 B p i I-IELvETIcA DETAIL A . MAK6 WIPE LAEELS "TBZ-1". LIhHT, ELK orJ C L E M TAPE. PLUG CONEJECTOR A k, INTO THE ' I S O " C q N N ~ T a RON T H E 6hLZ PANEL. u i u ~OIHERWISE UNLESS n ARE ~ ~ INmIWHES SPECI~LD ~ AusE Ahl XLR-5-32 FOR TIIE"ISO"CON~!EL~R.W I R E A 5 SWWu. 5. DELETE ~ I L K S L R E E ~*LOOP/EXT* J FROM BACK PANEL. COVER 1.~11i-i LABEL "150". (MAKE'XSO' LABEL WITH U R N 7YPE.
3 I 2 I 1 REVISIONS ZONE I 1 DlTE OESCRlPrlON REV I I I SEE 5HEET I APPROVED I RT5 UNE (2 CH) XLR-3-32 CUT ' \ SLEEVE W\RE € N O S @ REMOVE R57 FOR -DL OPTION. Q R 3 \ CHhNGES FROM 5 b K T O \ O K . @ R A CHRNGES FROM 220'6 TO 22K. 24 @ @ REMOVE @) MOMENTRRY M \ C N O T USED DN UNITS W\TH CALL L\GHT OPT\OM L-L). CUT SLEEVE W\RE ENDS. WEMOVE W7. @ UJT ' JUMPERS. @CUT TRhCES O N C\RCU\T 5 \ D E . T R R C E S ON C O M P O N E N T S\DE.
-. - - -- J3 ~5 m-I REAR PANEL RTLUM$'CHJ "PROGRAM IAI" - SEE-SHEET orJc LT (S\OPTIO~~ W ~ E UP R h W PRE~EIJ'~: a. ADD 13 (~1.19003), LI05 $ L 1 0 6 ( 1 0 ~ ~ / 5EL=). 0~ B u s Wire ADD @Z4/W& RED JUMPER F%M E b T O U5M. "22 JUMPER FIZOM €5 70 €7. , J4 "LOOP" CoNNW;ToR 15USED FOR 'USM " CON~JECTOR. ERASE. 'WW/F_XT" ~ILK~CEENI~A G m LABEL "USM': kJipE hS 5H0Wd. 7. FOR uw=z~~lcdav BALANCED MIL tlJp~T0 W l 0 d DUAL 5 0 K AUDIO (RTS # 14.