Datasheet

Document Reference No.: FT_000204

DB9-USB Datasheet

Version 2.1

Clearance No.: FTDI# 130

4) The following screen appears:

Figure 3.3 – Automatic Install

5) Wait while the driver is found, downloaded, and installed. This step may take a couple minutes

depending on the Internet speed.

6) After the files are found and installed, click “Finish” to complete the installation.

Figure 3.4 – Complete Hardware Installation

7) Steps 2 through 6 will repeat. The first time installs the basic USB Serial Converter in the USB

device tree. The second time installs the Virtual COM Port layer in the Ports tree and assigns the

COM port number.

8) When both portions of the device driver have been installed successfully, the following message

will appear, indicating that the device is ready.

Figure 3.5 – Hardware Ready