Service manual

27
6. In single-step mode, use the
↑↑ ↓↓
keys to make your final intercom port selection.
☞
If you cannot locate the destination that you are looking for, it may not have scrolling enabled in
ADAMedit.
7. Copy the selected port to a talk or listen key:
a. Tap
COPY
b. Tap down on an intercom key to assign talk, or tap up to assign listen.
Clearing a Key Assignment
There are two ways to clear a key assignment:
Method 1: Clearing the Call waiting Window and Copying it to a Key
1. Clear the
Call waiting
window, if necessary, by tapping up one or more times on the
Call waiting
key.
2. Tap the
COPY CW
key.
3. Tap the key that you want to clear. Tap up to clear listen, down to clear talk.
☞
If a key will not clear, it is probably restricted using the "R" check box in ADAMedit.
Method 2: Copying a Blank Key Assignment to the Key that You want to Clear
1. Tap the
FUNC
key.
2. Tap the
EX COPY
key.
3. Tap an unassigned key.
4. Tap the key that you want to clear. Tap up to clear listen, down to clear talk.
☞
If a key will not clear, it is probably restricted using the "R" check box in ADAMedit.