Service manual

42
10. Tap the intercom key that you want to assign. This is the key that will activate when the GPI input
activates.
11. Tap
CLR
to exit, or
BACK
to back up and make more assignments.
12. "Run Service Menu, Save Cfg", page 44, to store local GPIO settings.
Assigning an Input to Activate a Key Group
1. Select
, then tap
PGM
.
2.
displays.
3. Tap
PGM
.
4.
displays.
5. Press
↓↓
or
↑↑
to display a different GPI input.
6. Tap
PGM
to select a GPI input.
7. Press
↓↓
to select
.
8. Tap
PGM
.
9. By default,
displays. Press
↓↓
or
↑↑
.to display a different group.
10. Tap
PGM
. An arrow will appear to indicate that the group is now selected. For example, if you press
PGM
to select Group 1,
→
displays.
11. Tap
CLR
to exit, or
BACK
to back up and make more assignments.
12. Run Service Menu, Save Cfg, page 44, to store local GPIO settings.
Removing an Input Assignment
1. Select
, then tap
PGM
.
2. Press
↓↓
or
↑↑
if necessary to select
.
3. Tap
PGM
.
4. Press
↓↓
or
↑↑
.to display the GPI input that you want to remove.
5. Tap
PGM
.
6. Press
↓↓
to select
.
7. Tap
PGM
.
8.
→
displays. The arrow indicates that "Not Assigned" is the new selection.
9. Tap
CLR
to exit.
10. Run Service Menu, Save Cfg, page 44, to store local GPIO settings.