Service manual

Telex Communications
54
permanent talker.
NOT PL Listener button
Use the NOT PL Listener button to deselect a port or ports as permanent
listeners for the currently viewed PL assignment.
1. Click NOT PL Listener to deselect the port assignment as a
permanent listener.
SCROLL ENABLE
Scroll enable check boxes appear in the setup views for the following destination types: intercom
ports, party lines, IFB's, Special Lists, GPI Outputs, UPL Resources, and ISO's. The Scroll Enable
check boxes controls who can view destinations in scroll lists and assign those destinations to
keypanel keys. When you are using AZedit within your own intercom system, you always have access
to the complete scroll lists. However, access for everyone else is controlled as follows:
Local check box
If Local is checked, any keypanel operator in your intercom system that
has a programmable keypanel can find the destination name in a scroll list
and assign it to a key. If you remove this check mark and send the change
to the intercom system, keypanel operators will not see the destination
name in their scroll lists, and therefore, will not be able to assign it to a
key. They will also not be able to assign it using keypad numeric entry
(KP9X series keypanels). And, if the destination name appears in any
display on their keypanel, they will not be able to copy it to any other key.
Trunk check box
The Trunk check box is only selectable if trunking has been activated. If
you place a check mark here, any keypanel operator in a remote intercom
system that has a programmable keypanel can view the destination in a
scroll list and assign it to a key on their keypanel. If you remove this check
mark and send the change to the intercom system, remote keypanel
operators will not be able to view the destination or assign it to a key by
any means.
AZedit check box
The AZedit checkbox is also only selectable if trunking has been
activated. If you place a check mark here, an AZedit user in a remote
intercom system will be able to view the destination in a scroll list and
assign it to keypanel keys in the remote intercom system. If you do not
want remote AZedit users to have access, remove the check mark and
send the change to the intercom system.
PARTY LINE TALLIES
Local check box
Use Local Party Line Tallies when two or more keypanels have keys
assigned to the same party line within the same Intercom system.
Note: Typically, the tally indication is in the form of a
flashing alphanumeric display (KP9x series keypanels)
or a continuously lit, red LED talk key indicator (most
other keypanels). The tally indication tells the keypanel
operator that activating the party key will break in on a
conversation this is in progress.
Trunk check box Use Trunk Party Line Tallies when two or more keypanels have keys
assigned to talk to the same party line across remote Intercom systems.
Note: Typically, the tally indication is in the form of a
flashing alphanumeric display (KP9x series keypanels)
or a continuously lit, red LED talk key indicator (most
other keypanels). The tally indication tells the keypanel
operator that activating the party key will break in on a
conversation this is in progress.
Select All button
Selects all list items in the current view.
1. Click Select All to select all the items in the current view.
De-select All button
De-selects all list items in the current view that are selected.