Service manual

Telex Communications
80
The Edit Alpha / Description screen appears.
Note: The Ctrl+F12 may need to be activated before it will
function properly.
LC list column
The LC column displays the scroll enable settings for the GPI
Output port.
LC indicates Local
TK indicates Trunk
AE indicates AZedit
For each type of scrolling, the letters will appear green if that
type of scrolling is enabled, brown (or red when selected) if that
type of scrolling is disabled.
TK list column
The TK column displays the scroll enable settings for the GPI
Output port.
LC indicates Local
TK indicates Trunk
AE indicates AZedit
For each type of scrolling, the letters will appear green if that
type of scrolling is enabled, brown (or red when selected) if that
type of scrolling is disabled.
AE list column
The AE column displays the scroll enable settings for the GPI
Output port.
LC indicates Local
TK indicates Trunk
AE indicates AZedit
For each type of scrolling, the letters will appear green if that
type of scrolling is enabled, brown (or red when selected) if that
type of scrolling is disabled.
Input list column
The Input column displays the port settings set up for each GPI
Output.
Alpha list column
The Alpha column displays the name of the input port settings
set up for each GPI Output.
Output list column
The Output column displays the output port settings for each
GPI Output.
Alpha list column
The Alpha column displays the name of the output port settings
for each GPI Output.
Status list column
The Status column displays information in ONLINE or SERVER
mode only.
If the GPI Output is activated, ON will display, otherwise OFF will
display.
NOTE: To access the Edit GPI Out screen, double-click an RY from the list, the Edit GPI Out edit
screen will appear. For more information on the Edit GPI Out screen, see the AZedit Help file.
Right-Click Guide to the GPI Out screen
Built into AZedit are many different ways to get to the same information, by buttons, menus, and right-clicking. The
following is a list of menus and screens you can access by right clicking from the GPI Out main screen.