Specifications

rtsintercoms.com

VKP & RVON Series

VoIP System Options

See Voice-over IP (Pages 12-13)

GPIO-16

General Purpose Input/Output Interface

Height Width Depth Weight Color

1¾” (4.5 cm) 19” (48.26 cm) 7” (17.78 cm) 5.48 lbs (2.49 kg) Grey

Each GPIO-16 interface provides 16 opto-isolated inputs and 16 relay outputs.

The GPI inputs can be set up to remotely controlled keypanel keys to activate

intercom ports, party lines, relay outputs, etc. within the intercom system. The

relay outputs are typically assigned for activation from keypanel keys. They can

be used to control lighting or to key remote transmitters, paging systems, etc.

Relays can be assigned to keys via the AZedit intercom configuration software. The

GPIO-16 supports two communication modes: RS-485 serial and Ethernet. The UPL

logic in AZedit enables custom functionality that automates or schedules certain

actions to occur.

MDA-100

Mixing Distribution Amp

Height Width Depth Weight Color

1¾” (4.5 cm) 19” (48.26 cm) 8½” (21.59 cm) 7.38 lbs (3.35 kg) Grey

The MDA-100 mixing and distribution amplifier contains an 8x1-summing amplifier

(mixer) and a 1 x 8 distribution amplifier in a case that is one rack unit high. The

MDA-100 is useful, for example, in camera control (CCU), where multiple camera

operators have to talk and listen to one master control location. In this application,

audio from each camera (up to eight) is fed to one of the summing amplifier inputs

of the MDA-100.

ISDN-2005

ISDN Telephone Interface

Height Width Depth Weight Color

1¾” (4.5 cm) 8¼” (20.8 cm) 8½” (21.59 cm) 3 lbs (1.36 kg) Grey

The RTS

ISDN-2005 system incorporates G.711 and G.722 audio codecs for

bidirectional communications. The ISDN-2005 can be used to remote keypanels,

supply trunking data and audio, and as a telephone interface.

System Peripherals

A full line of products to complete your

communications system, including interfaces

to party-line intercoms, cable, and telephone

lines, and relays. Accessories also include control

panels for IFB levels and assignments, panels for

adjusting system audio levels, microphones and

four-wire beltpacks.