Installation Guide

11
– When the AC plug is damaged.
– If liquid has been spilled into the base unit or extension unit.
– If the base or extension unit has been exposed to rain or water.
– If the Wireless Telephone Jack do not operate normally by fol-
lowing the operating instructions.
– If either the base unit or extension unit has been dropped or
appears to be damaged.
– If the Wireless Telephone Jack exhibits a distinct change in per-
formance.
Safety information
General
• Only use the power supply that’s integrated in the product and
use only 110 voltages. If you are not sure of the power supplied
please contact your local power company. Using an unauthorised
power or power supply will invalidate the product guarantee and
may damage the telephone.
• Do not open the Wireless Telephone Jack Base unit or the Ex-
tension unit. This could expose you to high voltages or other risks.
• Radio signals transmitted between the handset and base may
cause interference with hearing aids.
• This product should not be used near emergency/intensive care
medical equipment and should not be used by people with pace-
makers.
Cleaning
• Unplug the Wireless Telephone Jack (Base unit and Extension
unit) before cleaning.
• Simply clean the Wireless Telephone Jack Base unit and
Extension unit with a damp (not wet) cloth, or an anti-static wipe.
• Never use household polish, as this will damage the product.
• Never use a dry cloth as this may cause a static shock.