User's Guide

Note: You must not connect the Wireless Telephone Jack to any of the following:
• Coin-operated systems
• Party-line systems
• Most electronic key phone systems
The Wireless Telephone Jack complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits
provide reasonable protection against radio and TV interference even when it is operation properly. To eliminate interference, you
can try one or more of the following corrective measures:
• Reorient or relocate the connected telephone, modem, fax etc.
• Increase the distance between the equipment and the telephone, modem, fax etc.
Due to existing differences between public telecommunication networks in different states, this authentication does not constitute in
itself an unconditional guarantee for successful operation of these units on every network terminal point.
Intended use
The Wireless Telephone Jack is designed to switch onto the analogue telephone network via the normal telephone socket and an
ordinary POT telephone. Any other use is deemed as
not intended use. The company does not accept claims resulting from unauthorised alterations or modifications not described in this
user manual.
Denmark, Noerresundby, 2005-01-10
Klaus Ahlbeck
RTX Products A/S
Stroemmen 6
9400 Noerresundby
Denmark
Telephone: [phone]
Fax: [phone]