User Manual

ENGLISH
■
35
USER MANUAL
This EUT has been shown to be capable of compliance for localized specifi c absorption rate (SAR) for
uncontrolled environment/general population exposure limits specifi ed in ANSI/IEEE Std. C95.1-1992
and had been tested in accordance with the measurement procedures specifi ed in FCC/OET Bulletin 65
Supplement C (2001) and IEEE Std. 1528-2003 December 2003).
The standards include a substantial safety margin designed to assure the safety of all persons, regardless
of age and health. The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specifi c Absorption Rate, or SAR. The SAR limit set by the FCC and Canada is 1.6W/kg
*.(W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to
give additional protection for the public and to account for any variations in.
RF EXPOSURE FCC
Tests for SAR are conducted using standard operating positions specifi ed by the FCC with the phone
transmitting at its highest certifi ed power level in all tested frequency bands. Although the SAR is deter-
mined at the highest certifi ed power level, the actual SAR level of the phone while operation can be well
below the maximum value. This is because the phone is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and certifi ed to the FCC that
it does not exceed the limit established by the government-adopted requirement for safe exposure. The
tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the
FCC for each model. (Body-worn measurements may differ among phone models, depending upon
available accessories and FCC requirements). The highest SAR value for this phone when tested for use
at the ear is 0.043 W/kg, and when worn on the body is 0.015 W/kg for 1.5cm distance. (Body worn
measurements differ among phones depending upon available accessories and the FCC requirements.)
While there may be differences between the SAR levels of various phones and at various positions, they
all meet the government requirement for safe exposure.
For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only accesso-
ries that contain no metallic components and provide a separation distance of 15mm (0.6 inches) to the
body. Use of other accessories may violate FCC RF exposure guidelines and should be avoided.
CORDLESS TELEPHONE PRIVACY
Cordless telephones are radio devices. Communications between the handset and base of your cordless
telephone are accomplished by means of radio waves which are broadcast over the open airways. Be-
cause of the inherent physical properties of radio waves, your communications can be received by radio
receiving devices other than your own cordless telephone unit. Consequently, any communications using
your cordless telephone may not be private.
PROGRAMMING AND TESTING OF EMERGENCY NUMBERS
If this product has memory dialing locations, you may choose to store police, fi re department and emer-
gency medical service telephone numbers in these locations. If you do, please keep three things in mind:
1. It is recommend that you also write the telephone number on the directory card, so that you can still
dial the emergency number manually if the memory dialing feature doesn’t work.
2. This feature is provided only as a convenience, and the manufacturer assumes no responsibility for
customer reliance upon the memory feature.
3. Testing the emergency telephone numbers you have stored is not recommended. However, if you do
make a call to an emergency number: