User's Manual
Additional Information G266/G566 Page 5
x Before placing the G266/G566 in the desktop charger, make sure the
battery is installed properly (see User Manual) and the battery cover is
securely in place.
x Do not charge the batteries by any other means! Using any other
charger may damage the battery and/or the G266/G566 and might even
cause the battery to explode.
Like any radio-based equipment, the G266/G566 can potentially cause
interference with other equipment.
However due to the very low
transmission power level the chances for interference is very small. Research
proves that operational DECT phones (and thereby the G266/G566) normally
ĚŽŶƚŝŶĨůƵĞŶĐĞĞůĞĐƚƌŽŶŝĐĞƋƵŝƉŵĞŶƚ Even so it is advised not to place the
G266/G566 near sensitive electronic equipment. When the G266/G566 is
operated in straight nearness of sensitive electronic equipment incidental
influences can appear. You are advised not to place the G266/G566 on or
close (less than 10cm) to this kind of equipment, even in standby mode.
Do not rely on the G266/G566 as your only means of communication when
making indispensable calls (e.g. an emergency call).
Observe all warnings and instructions contained in the G266/G566 User
Manual.
When using the G266/G566 and its accessories observe the following:
x Do not expose the G266/G566 to rain or moisture, nor use the handset
near water.
x Do not use the G266/G566 on premises subject to explosive hazards.
x Do not expose the G266/G566 to high temperatures or direct sunlight
for an extended period of time.
x Plug the AC adaptor in a wall outlet socket near the equipment for easy
access/removal of the AC adaptor. Take care that the power cord does
not cause a trip hazard.
Please also use the other documentation supplied with the various parts of
your telephone system.