User's Manual

Error! Use the Home tab to apply Titre 1 to the text that you want to appear here.
8AL90387ENAAed0a
16 /61
2.3 Charging your telephone battery
Your phone is provided with a desk support for charging it.
2.3.1 Charging the battery on a single charger
Place the handset front forward into the support as shown in the picture. Plug the USB cable into the
AC/DC adaptor. Plug the AC/DC adaptor into the mains power supply.
The AC/DC adaptor is not provided with the set. Please contact your provider for a recommended AC/DC
adaptator.
Depending on the configuration of the handset, a beep is emitted when charging begins. The battery status
icon flashes and the led lights up.
• Green steady: the phone is on the charger and the battery is fully charged.
• Red steady: the phone is on the charger and the battery is charging.
You can configure how the handset behaves when it is installed on the charger using the settings menu.
Refer to the chapter on configuring your telephone: Adjusting your telephone functions.
2.3.2 Charging the battery on a dual charger
Place the handset front forward into the Dual Charger front slot. Place a spare Battery Pack in the back
slot, charging contacts down. Push down and forward the spare battery under the clip to keep it in charge
(A).
The AC/DC adaptor is not provided with the set. Please contact your provider for a recommended AC/DC
adaptator.
Depending on the configuration of the handset, a beep is emitted when charging begins. The battery status
icon flashes and the led of the handset lights up. If a spare cattery is in the charger a dedicated led on the
charger lights up.
• Green steady: the phone is on the charger and the battery is fully charged.
• Red steady: the phone is on the charger and the battery is charging.
To remove the spare battery, push it down and backward to unclip it.
You can configure how the handset behaves when it is installed on the charger using the settings menu.
Refer to the chapter on configuring your telephone: Adjusting your telephone functions.
A