Product Info

SME VoIP Handset Guide 4.8
Proprietary and Confidential
Page | 59
7.1.3 Silencing an Incoming Call
When the handset is alerting it is possible to press the left softkey “Silent” whereas the handset will continue to
alert, but without any heard ringing.
7.1.4 Ending a Call
To end an ongoing call, press the red “On-hook” key , and the call will be terminated. The duration of the
call is shown in the display. Furthermore, this duration time can also be viewed from the call list where the call is
stored.
NOTE: If one call is active and another call is on hold, then the active call will be terminated when pressing the
red “On-hook” button, and the handset automatically returns to the call on hold; i.e. the call on hold is now
active, and the user must press the red “On-hook” button again to terminate this call.
7.2 Initiating a Call
A call can be initiated from different locations on the handset:
- By entering the number directly from idle
- From the “Contacts” menu
- From the “Calls” menu
- From the “Central Directory”
How to initiate a call from these different directories is explained in the following sub sections.
7.2.1 Initiating a Call from Idle
When initiating a call, it must be done according to the following:
1. Enter the number of the person you want to call when the handset is in idle.
2. Press the green “Off-hook” button to call the number.
3. The handset will show a “Calling” screen as seen above.
4. When the counterpart answers the call, the screen will show “Connected”, and the two parts are now in
call.
7.2.2 Initiating a Call from Contacts
To initiate a call from the contact list, there must be contacts added to the local phonebook. When this
prerequisite is met, a local contact can be called by highlighting the contact in the contact list and then pressing
the left softkey “Call”, or pressing the green “Off-hook” button.
NOTE: The list of local contacts can be reached from the menu “Contacts” or directly from idle by pressing the
left softkey when in idle.