Product Info

SME VoIP Handset Guide 4.8
Proprietary and Confidential
Page | 42
The displayed information is as follows.
Base station:
- Software version (the current software version of the base station)
- Hardware version (the hardware version of the base station)
- IP address (the IP address of the base station)
- MAC address (the MAC address of the base station)
- System name (the name of the system of base stations that the handset is registered to)
Handset status:
- Software version (the current software version of the handset)
- Hardware version (the hardware version of the handset)
- DECT band (the DECT band that the handset is using, e.g. EU or US)
- Battery level (the current battery level of the handset)
- IPEI (the IPEI/IPUI number of the handset is a static number identifying the specific handset)
6.5.11 Auto Answer
In this menu it is possible to change the settings for auto answer on the handset.
The “Auto answer” feature makes it possible for the handset to automatically answer an incoming call. This
setting can be set to the following conditions:
Normal
With this enabled the handset does not answer a call automatically, but the user must always press the green
“Off-hook” key to answer a call. The call is not answered by removing the handset from the charger.
Any key
In this mode pressing any key on the keypad (except from the red “On-hook” key, and the three softkeys that still
have their different functions) will answer an incoming call. The call is not answered by removing the handset
from the cradle/charger.
Automatic
If the feature “Automatic” is enabled on the handset, then the incoming call is answered automatically after 5
seconds.