Headset Operations Manual RTX8930 Version 0.
Contents Headset Operations Manual ....................................................................................................................... 1 Contents...................................................................................................................................................... 2 1 About This Document ......................................................................................................................... 3 1.1 Audience ..................................
1 About This Document This document describes the features and functionalities available in the RTX SME VoIP DECT 8930 Headset. We describe how to operate the headset without going into details about its mechanical features. The reference for features and operation in this manual is RTX generic mode. 1.1 Audience This guide is intended for everyday users as well as system administrators. 1.
2 Basic Operation This section describes how to switch on and off the RTX 8930 headset and how to register the unit on an RTX 8660 SME VoIP system. 2.1 How to Switch the Headset On/Off 2.1.1 Switching on the headset To switch the headset on, press the AUX key. When the headset is on, the blue LED will blink fast for a short while until a signal is detected.
3 Calls Operations 3.1 Incoming Call As the headset receives an incoming call, a ringtone will be played back. 3.1.1 Answering an Incoming Call To answer an incoming call, press the HOOK OFF key. 3.1.2 Reject an Incoming Call It is not currently possible to reject an incoming call. 3.1.3 Ending a Call To end an ongoing call, press the HOOK OFF key. 3.2 Volume and Muting 3.2.
Regulatory Information United States Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Regulatory Information Canada Interference Information This product meets the applicable Industry Canada technical specifications. Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada. This device complies with Industry Canada licence‐exempt RSS standard(s).
