User's Guide

RTX9440 TYPE APPROVAL USER GUIDE 1.3 10 |
Proprietary and Confidential
The table below summarizes the various LED states:
LED STATE
STATE
UNLIT
No power in unit
UNLIT/SOLID RED
Error condition
BLINKING GREEN
Initialization
SOLID RED
Factory reset warning or long press in BS reset button
BLINKING RED
Factory setting in progress
SOLID GREEN
Ethernet connection available (Normal operation)
BLINKING RED
Ethernet connect not available OR handset de/registration failed
SOLID RED
Critical error (can only be identified by RTX Engineers). Symptoms include no
system/SIP debug logs are logged, etc.
ORANGE
Press reset button of base station.
BLINKING ORANGE
No IP address received
3.3 RTX Base Unit – Reset feature
It is possible to restart or reset the base station unit by pressing a knob at the bottom edge of the unit. Alternatively, it
can be reset from the SME Configuration Interface. We do not recommend this; but unplugging and plugging the
Ethernet cable back to the PoE port of the base station also resets the base unit.