User's Guide

RTX9440 TYPE APPROVAL USER GUIDE 1.3 11 |
Proprietary and Confidential
3.4 Find IP of Base Station
To find IP of the installed base station two methods can be used; Using handset Find IP feature or browser IPDECT
feature.
3.4.1 Using handset Find IP feature
On the handset press “Menu” key followed by the keys: *47* to get the handset into find bases menu. The handset
will now scan for the RTX9440 base. Depending on the amount of powered on bases with active radios and the
distance to the base it can take up to minutes to find a base.
- Use the cursor down/up to select the base MAC address for the base
- The base IP address will be shown in the display
The feature is also used for deployment.
3.4.2 Using browser IPDECT
Open any standard browser and enter the address:
http://ipdect<MAC-Address-Base-Station>
for e.g. http://ipdect00087B00AA10. This will retrieve the HTTP Web Server page from the base station with hardware
address 00087B00AA10.
This feature requires an available DNS server.
3.5 Login to Base SME Configuration Interface
1. Connect the Base station to a private network via standard Ethernet cable (CAT-5).
2. Use the IP find menu in the handset (Menu * 4 7 *) to determine the IP-address of the base station by matching
the MAC address on the back of the base station with the MAC address list in the handset.
3. On the Login page, enter your authenticating credentials (i.e. username and password). By default, the username
and password are admin. Click OK button.
4. Once you have authenticated, the browser will display front end of the SME Configuration Interface. The front end
will show relevant information of the base station.
Screenshot: