User's Guide

RTX9440 TYPE APPROVAL USER GUIDE 1.3 4 |
Proprietary and Confidential
1 About This Document
This document describes the installation and configuration of the Cisco VoIP System (RTX9440 base, RTX864x or
RTX8440 handset).
1.1 Important Assumptions
This document was written with the following assumptions in mind:
1) You understand network deployment in general
2) You have working knowledge of basic TCP/IP/SIP protocols, Network Address Translation, etc...
3) A proper site survey has been performed, and the administrator have access to these plans
1.2 Abbreviations
For this document, the following abbreviations hold:
DHCP: Dynamic Host Configuration Protocol
DNS: Domain Name Server
HTTP(S): Hyper Text Transfer Protocol (Secure)
(T)FTP: (Trivial) File Transfer Protocol
IOS: Internetworking Operating System
PCMA: A-law Pulse Code Modulation
PCMU: mu-law Pulse Code Modulation
PoE: Power over Ethernet
RTP: Real-time Transport Protocol
RPORT: Response Port (Refer to RFC3581 for details)
SIP: Session Initiation Protocol
SME: Small and Medium scale Enterprise
VLAN: Virtual Local Access Network
TOS: Type of Service (policy based routing)
URL: Uniform Resource Locator
UA: User Agent
1.3 Document History
REVISION
AUTHOR
ISSUE DATE
COMMENTS
0.1
OHO
08-Jan-2019
First Draft
1.0
OHO
14-05-2019
Updated after review w CAP
1.1
OHO
03-06-2019
Update regarding mounting height
1.2
TWL
6-Nov-2019
Update the FCC warning message
1.3
TWL
7-Nov-2019
Update the ISEDC warning message
1.4 Documentation Feedback
We always strive to produce the best and we also value your comments and suggestions about our documentation. If
you have any comments about this guide, please enter them through the Feedback link on the RTX website. We will
use your feedback to improve the documentation.