High-End Headset Guide for RTX725x Installation & Configuration Network Deployment Operation & Management Technical Reference Document Version 1.0 © Apr-2020 RTX A/S, Denmark RTX725x GUIDE 1.
Trademarks RTX and the combinations of its logo thereof are trademarks of RTX A/S, Denmark. Other product names used in this publication are for identification purposes and maybe the trademarks of their respective companies. Disclaimer The contents of this document are provided about RTX products. RTX makes no representations with respect to completeness or accuracy of the contents of this publication and reserves the right to make changes to product descriptions, usage, etc., at any time without notice.
Table of Contents High-End Headset Guide for RTX725x ................................................................................................................................ 1 1 2 3 About This Document ................................................................................................................................................. 5 1.1 Audience .........................................................................................................................................
7 DECT cradle registration ........................................................................................................................................... 22 RTX725x GUIDE 1.
1 About This Document This document describes the configuration, management, operation and maintenance of the RTX725x headset series which are part of the range of the DECT system. For customer specific modes, please refer to specific customer agreements. 1.1 Audience This guide is intended for everyday users. Furthermore, network administrators, IT support and anyone who wishes to gain knowledge on the fundamental features of the RTX725x headset series can also benefit from this material. 1.
1.6 References/Related Documentation PC tool Base guide 1.7 Document History REVISION 1.0 AUTHOR DKO ISSUE DATE 07.05.2020 COMMENTS First release 1.8 What is new What new features have been added. VERSION V1.0 FEATURE First release 1.9 Documentation Feedback We always strive to produce the best and we also value your comments and suggestions about our documentation. If you have any comments about this guide, please enter them through the Feedback link on the RTX website.
2 Package overview Prior to opening, examine the shipping package for evidence of physical damage. If there is proof of mishandling prior to opening, you must report it to the relevant support center of the regional representative or operator. 2.1 Content Make sure all relevant components are available in the package before proceeding to the next step.
3 System design The high-end headsets support the DECT and BT technology to establish connection with other devices. They are used with the RTX7451 DECT base and Desk Phone / PC / Laptop/ mobile phones. The selected microphone is balanced together with the headset filters to reduce the background noise to provide an ultimate understandable and clear speech. On the other hand, the receivers are balanced to the receiver housing and cushion, so the headset will provide the user an excellent stereo experience.
Handover to VoIP multicell systems The RTX725x headset and RTX7451 base together can integrate into VoIP multicell and dual cell systems. The headset base will register on behalf of itself and the headset. The two registrations are independent but will be linked logically as one unit on the VoIP system. The purpose of this integration is to hand over the user’s calls to the VoIP system for the user to be flexible in terms of location. Fig.3 Call Handover 3.
4 About the device The RTX725x series are wireless DECT+BT headsets. As mentioned before, the headset connects to the DECT base, which acts as a charger for the headset, via the DECT wireless technology. It can also connect via Bluetooth to supported devices such as mobile phones and Bluetooth compatible desk phones. A Busy-light indicator on the headband is used to indicate that the user is busy.
Ear cup movement Flexible boom Boom movement Headband material Headband rachet Ratchet marking indication (on head side) Busy light Proximity sensor (Auto Hook off) Noise cancellation ENC ANC Echo Cancelling No. of microphones No. of receivers No.
4.3 Headsets overview The following section aims to give an overview of the headsets and the available buttons. The following drawings illustrate the dimensions of the RTX725x series headsets. Fig.5: Dimensions of RTX7251 Fig.6: Dimensions of RTX7252 Fig.7: Dimensions of RTX7254 RTX725x GUIDE 1.
The images below represent the styling of all 3 headsets from the RTX725x series. By default, the color is grey, and the devices have removable ear cushions. Fig.8: Styling of RTX7252 and RTX7254 Fig.9: Styling of RTX7251 Ear cushions The cushions of the headsets are removable and replaceable. There are two types of ear cushions – on-ear and overthe-ear (Fig.7 Ear cushions). The only headset that supports the two types is the RTX7254.
Physical buttons The headset is operated using the buttons on the earcup with boom arm. The ANC button is located on the opposite earcup as ANC is not available for Mono headsets. Fig.11: Double Bottom view Fig.12: One-sided view Fig.13: Back side view RTX725x GUIDE 1.
The following table represents the functions of the buttons seen on the figures above Input Power slider Scroll wheel with an integrated key Multi-Function Button Mute key DECT key BT key ANC key Functions Power the headset on and off Increase volume Decrease volume Play/Pause music Skip to next track Answer call End call Reject call Trigger AI voice assistant Toggle busy Toggle mute Announce battery level Enter DECT pairing mode Reset settings Toggle Bluetooth Enter Bluetooth pairing mode Toggle ANC 4
DECT registration Battery status Busy mode Registration, In progress Blue, red Alternating Registration, Success Green Blink 3 times Registration, Failed Red Blink 3 times No battery Cyan Blink Fully charged Green ON Charging Green Breathing Low Red Breathing Busy enabled or call active Red ON 4.5 Battery The headsets use 600mAH Li-polymer battery, which is easily replaceable after removing the battery lid, as illustrated on the image below. Fig.
5 Features overview This section aims to introduce you to the available features of the headset series RTX725x. Some of the features will be briefly described through the sections below, whereas the main highlights will be presented via a table with function descriptions. 5.1 Eco mode RTX725x headsets support ECO mode which increases the talk time to 12 hours. This is done by limiting some of the features, such as power consumption of the LED indication and audio codec selection.
5.5 Summary The table below presents a summary of the features available in the headsets. Input Functions DECT frequency bands: 1880 – 1895 MHz (Taiwan) 1880 – 1900 MHz (EMEA) 1910 – 1920 MHz (Brazil & Uruguay) 1910 – 1930 MHz (LATAM, Argentina, Chile) 1920 – 1930 MHz (USA, Canada) G.726, BV16 G.
Range (max) Security Standard DECT interface Handover to VoIP multicell systems Software Update Downloadable Air-interface Bluetooth No. of pairings BT Version Frequency Sensitivity Output power Range Antenna Simultaneous connections Profiles - A2DP Hsp - HFP - DIP - AVRCP Codec - SBC - mSBC - CVSD Audio Codec Class of device Bluetooth device address Bluetooth device name Encryption Pairing mode Automatic connect Others HAC compliant RTX725x GUIDE 1.
6 Regulatory compliances 6.1 Safety & Type approvals The regulatory compliance and measurements reports required are: Approval Safety Safety Safety FCC FCC FCC FCC FCC IC IC IC IC IC IC CE CE CE CE CE CE CE RCM RCM RCM RCM RCM RCM RTX725x GUIDE 1.0 Proprietary and Confidential Standard GENERAL SAFETY CB IEC62368, EN62368, IEC60950, EN60950 Including the country deviation to US/CA, AU/NZ and EU UL62368, and NRTL for US and CA CB Scheme Certificate US FCC Part 15B FCC Part 15D FCC Part 15.
6.2 Environmental compliances RoHS Per Directive 2011/65/EU on the Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment REACH Per Directive 1907/2006 on Registration, Evaluation and Authorization of Chemicals WEEE Per Directive 2012/19/EU on Waste Electrical and Electronic Equipment (RTX will add waste bin information on product labels).
APPENDIX 7 DECT cradle registration The following steps serve as a guideline for the process of registering the RTX725x headsets to the RTX745x base. Registration mode is enabled by inserting the headset into the base cradle. The headset can be registered as both primary and secondary. When the headset is locked as secondary on another RTX745x base or on an RTX374x FP dongle, the user may return the headset to use its primary state by inserting the headset into the cradle of the primary base.
8 Declaration of compliance 8.1 FCC warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Cet appareil est compatible avec la licence de l’Innovation, la Science et le développement conomique du Canada à l’exemption des normes RSS. Le fonctionnement est sujet aux deux (2) conditions suivantes : (1) Cet appareil peut ne pas causer de l’interférence, et (2) Cet appareil doit accepter l’interférence, incluant de l’interférence qui peut causer un mauvais fonctionnement de cet appareil.