Installation Instructions

RTX725x GUIDE 1.0 5 | P a g e
Proprietary and Confidential
1 About This Document
This document describes the configuration, management, operation and maintenance of the RTX725x headset series
which are part of the range of the DECT system. For customer specific modes, please refer to specific customer
agreements.
1.1 Audience
This guide is intended for everyday users. Furthermore, network administrators, IT support and anyone who wishes to
gain knowledge on the fundamental features of the RTX725x headset series can also benefit from this material.
1.2 When Should I Read This Guide
Read this guide before you install the devices and before setting up the DECT connection.
This manual will enable you to set up components in your network to communicate with each other and deploy a fully
functionally system.
1.3 What’s Inside This Guide
We summarize the contents of this document in the table below:
WHERE IS IT?
CONTENT
PURPOSE
CHAPTER 2
Package overview
Presents the package content and handling
CHAPTER 3
System design
Gives an overview of how RTX725x communicates in the
system
CHAPTER 4
About the device
Provides information on the device specifications and
hardware
CHAPTER 5
Features overview
Introduces the supported features on the headset
CHAPTER 6
Regulatory compliances
Presents the adherence to the laws and regulations
CHAPTER 7
(APPENDIX)
DECT cradle registration
Illustrates the steps behind the process
1.4 What’s Not in This guide
Since the RTX725x series covers 3 different headsets, one of them (RTX7251) will not be covered in detail in this
document. However, in general, it follows the same specification as the RTX7252. More details about the different
headsets can be seen in the beginning of the document.
Furthermore, the paper is not intended as a comprehensive reference to details and specific steps on how to
configure other vendor specific components/devices. For such a reference to vendor specific devices, please contact
the respective vendor for documentation.
1.5 Abbreviations
For this document, the following abbreviations hold:
DECT: Digital Enhanced Cordless Telecommunications
MWI: Message Waiting Indicator
PCBA: PCB Assembled
MFB: Multi-Function Button
BT: Bluetooth