Owner's manual

ManualsBrandsRubbermaid ManualsFor Home1800384

Auto Door™

Owner’s Manual

Operating and Maintenance

Instructions

Auto Door™

Manual Del Propietario

Instrucciones de Funcionamiento y

de Mantenimiento

Auto Door™

Le Manuel du Propriétaire

Instructions d’Utilisation et d’Entretien

Customer Service • Atención al Cliente • Service Clientèle

1-800-347-9800

www.rubbermaidcommercial.com

FOR COMMERCIAL USE

PARA USO COMMERCIAL

UTILISATION COMMERCIALE

Rubbermaid Commercial Products LLC

Winchester, VA 22601 U.S.A.

www.rubbermaidcommercial.com #1788560

Printed in China/Impreso en China/Imprimé en Chine

Model no./N.º de modelo/Nº de modèle :

Model No. : 1800381, 1800382, 1800383, 1800384

SKU no./N.º de SKU/Nº SKU :

1788560

Products manufactured under quality management system registered to ISO 9001:2000

Los productos están fabricados según el sistema de gestión de calidad registrado con la norma ISO 9001:2000

Produits fabriqués selon un système de gestion de la qualité ISO 9001:2000

SAVE THESE INSTRUCTIONS

CONSERVE ESTAS INSTRUCCIONES

VEUILLEZ CONSERVER CES DIRECTIVES

Summary of content (8 pages)

PAGE 1
Auto Door™ Owner’s Manual Operating and Maintenance Instructions Auto Door™ Manual Del Propietario Instrucciones de Funcionamiento y de Mantenimiento Auto Door™ Le Manuel du Propriétaire Instructions d’Utilisation et d’Entretien SAVE THESE INSTRUCTIONS CONSERVE ESTAS INSTRUCCIONES VEUILLEZ CONSERVER CES DIRECTIVES Products manufactured under quality management system registered to ISO 9001:2000 Los productos están fabricados según el sistema de gestión de calidad registrado con la norma ISO 9001:2000 Pro
PAGE 2
ENGLISH IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING: TO REDUCE THE RISK OF SEVERE INJURY OR DEATH: • Ensure power supply is available in ceiling above door jamb (120 volts; 60 hertz). •R ead And Follow All Installation Instructions • Auto Door is intended for use on interior pedestrian doors between 34”-42” wide with a maximum weight of 170 lbs.
PAGE 3
ENGLISH 1 2a The AutoDoor is supplied in the left hand configuration. Refer to steps A through D only if you require a right hand configuration. F G C B C D F A E B 90˚ G D A D E 90˚ H 2 F IMPORTANT: Left hand door B Right hand door E Left hand door Installation C Before Installation 1 6” min A Align Align Hold the door open 90˚. Place template against the door jamb Tape template in place.
PAGE 4
Installation 6 Push side mounting in Sensor must be installed in a location which can be observed by the person operating the sensor. Sensor must be in a position such that user is prevented from coming into contact with the door while using sensor. 4” m 8” G ”-4 E F 36 If mounting on the push side of the door: Take into consideration proximity of sensor to door frame, length of sensor wire and the vestibule area available.
PAGE 5
ENGLISH Installation 12 11 17 16 I E 2 3 1 1 2 Hold unit up to door jamb and install 3 mounting screws into frame. Plug sensor wire into one of the ports on control board. Hold door in 90˚ position. Turn the unit on using switch in front of main unit. Wave hand under front of sensor. When the arm reaches the extended position, turn the unit off. Mark an X where the roller arm contacts the door.
PAGE 6
Installation Additional Entrance Sensor Installation 23 22 3 B E K B B Attach plate to door with six screws. sensor plate C sensor cover With unit on, wave hand in front of sensor. Observe path of roller on the roller plate (it should ride between the screw heads and stay on the plate).
PAGE 7
ENGLISH Electric Strike Package Contents Electric Strike Installation 5 Please confirm that all items shown in the image below are included in the packaging. If any parts are missing, please call customer service at 1-866-524-5233. N O P 6 1 Q x2 Q O N 1 2 Parts List N electric strike O electric strike cable P electric strike screws Q electric strike anchors Electric Strike Installation 1 2 Insert electric strike wires into screw terminal and tighten.
PAGE 8
ENGLISH Auto Door Troubleshooting Guide Sensor Adjustment 2 1 PROBLEM POSSIBLE CAUSE REMEDY Door opening speed slows down significantly Overloading due to closer spring tension Refer to your door closer instruction manual to adjust the door closer so that the door opening resistance is less than 7 lbs., measured at the latching edge of the door.