Owner manual

8 9
Assembled Views – BH10Q HEPA
lid latches
frame
shoulder
straps
belt
chest
strap
ON/OFF
switch
hose
hose elbow
lid
carry
handle
paper bag
cloth bag
intake filter
HEPA filter
shoulder
strap slots
belt slots
accessory
holders
cord lock
lower lid latches
Bag/Filter locations
intake filter cage
Attach harness shoulder straps to frame by feeding buckles on
shoulder straps through slots on frame. Multiple slots allow
for adjustment.
5
A
1
1
3
B
2
Attach harness belt to frame by feeding buckles on belt
through slots on frame. Multiple slots allow for adjustment.
4
B
1
2
Harness Orientation
To attach back mesh to frame, orient elastic cords as shown
and slide upper cords into slots of frame.
Ensure that shoulder strap stitching faces upward, and that
the shoulder strap/belt seam is on the upper edge of the belt.
Back View
2
Back View
1
C
Assembly
Slide lower cords on both sides into slots of frame.
Fully insert hose elbow into lid opening.
ENGLISH
Reorder Numbers
paper bag ..................................................... 9VBPPB10
cloth bag ...................................................... 9VBPBA10
HEPA & intake lter set ................................. 9VBHHP10
hose ............................................................. 9VBPHS06
harness ......................................................... 9VBPHA06
Reorder by logging on to
www.rcpworksmarter.com or by
contacting your local distributor. Call
customer service at 1-866-524-5233
for service and to order genuine
Rubbermaid Commercial Products
replacement parts.