Use and Care Manual

Updated 4/1/2016
1
Rubberseal™ Roll and Trowel Grade
Flexible, Chemically Resistant, Seamless Rubber Membrane
Description
Rubberseal™ roll or trowel grade is a water based, VOC (Volatile Organic Compounds) free,
cold applied seamless rubber membrane specifically designed for protecting and waterproofing
concrete in corrosive environments, including applications in sewage and manhole
rehabilitation. Offering exceptional chemical resistance, puncture resistance and elongation of
>1500%, Rubberseal™ is a high-end emulsion that exhibits tremendous bond strengths.
Rubberseal™ installs easily by roll or trowel, quickly developing excellent film strength.
Rubberseal™ roll and trowel grade provide a sure seal, the choice for a durable waterproof
solution in the most demanding service applications.
Features & Benefits
 Elongation of >1500% to completely bridge and seal cracks that would allow penetration
of chemicals into the concrete structure.
 Can be applied in as little as 24 hours after removal of concrete forms
 Excellent chemical resistance, resistant to hydrogen sulfide attack.
 Tremendous tensile strength and puncture resistance
 Bonds to most of construction materials.
 Water based, non-toxic, non-flammable, solvent free and odorless, Rubberseal™ Spray,
Roller Grade or Trowel Grade will not contaminate the waste stream and is safe for
installation in confined areas.
 Resistant to aging, and UV exposure
 Zero VOC’s
 Modified formulas for spray-on applications
LEED Points Contribution LEED Points
MR Credit 5, Regional Materials 10% and 20%* 1-2 points
EQ Credit 4.2, Low-Emitting Materials: Paint & Coatings 1 point
*Using this Inflow’s product may help contribute to LEED certification of projects in the categories shown
above. Points are awarded based on contributions of all project materials.
Where to Use
 Properly prepared sound and stable concrete substrates that have had the forms
removed for at least 24 hours, and are surface dry.
 Use in conjunction with the Spray Grade of Rubberseal™ to complete waterproofing
applications in areas inaccessible to the spray application.
 Use with Inflow Geotextile to effect details (out of plane joints) or repairs in new or
existing applications of Rubberseal™ Roll-on or Trowel. Use to waterproof and coat
concrete in sewage and drainage systems to prevent the deterioration caused by
hydrogen sulfide attack.
 Use to waterproof concrete wherever a durable, chemical resistant coating is desired.
 Use to protect steel from corrosive elements.
 Use in fresh & saltwater fountains, reflecting pools, wastewater treatment plants, canals,
drainage systems, foundations, concrete planters, catch basins and more.
Limitations
 Substrate and ambient temperatures must be between 50F – 95F (10C – 35C)
 Do not apply in rain, or if rain is expected within 6 hours.