SDS

Rubberseal Liquid Rubber Dark Gray
SAFETY DATA SHEET
Jan 10, 2020
Page 1 of 4
PRODUCT NUMBER
FRG-02
PRODUCT NAME
Rubberseal Liquid Rubber Dark Gray
MANUFACTURER'S NAME
INFLOW SOLUTIONS LLC
1248 Gordon Park Rd
AUGUSTA, GA 30901
OSHA Regulatory Status:
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR
1910.1200)
GHS Pictograms:
Signal Word:
Warning
GHS Class:
Eye Irritant, Category 2.
Skin Irritant, Category 2.
Hazard Statements:
Causes eye and skin irritation.
Precautionary Statements:
Wear protective clothing, gloves, eye, and face protection.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling.
Take off contaminated clothing and wash it before reuse.
Dispose of unused contents, container, and other contaminated wastes in accordance
with local, state, federal, and provincial regulations.
If in eyes: Rinse cautiously with water for several minutes and remove contacts if
present and easy to do. Continue rinsing and get medical attention if eye irritation
persists.
If on skin: Wash with plenty of soap and water.
If swallowed: Rinse mouth and get medical attention if you feel unwell.
ROUTES OF EXPOSURE
INHALATION of vapor or spray mist.
EYE or SKIN contact with the product, vapor or spray mist.
EFFECTS OF OVEREXPOSURE
EYES: Irritation.
SKIN: Prolonged or repeated exposure may cause irritation.
INHALATION: Irritation of the upper respiratory system.
In a confined area vapors in high concentration may cause headache, nausea or dizziness.
SIGNS AND SYMPTOMS OF OVEREXPOSURE
Redness and itching or burning sensation may indicate eye or excessive skin exposure.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
None generally recognized.
CANCER INFORMATION
For complete discussion of toxicology data refer to Section 11.
PRODUCT INFORMATION www.inflowsolutions.com
INFORMATION [phone]
EMERGENCY [phone]
HMIS Codes
Health
1
Flammability
0
Reactivity
0
SECTION 1 — PRODUCT AND COMPANY IDENTIFICATION
SECTION 2 — HAZARDS IDENTIFICATION