User's Manual

8000001, May, 2005 MediaFlex 2900 Multimedia Access Point User’s Guide 33
Configuring the M2900 AP
Configuring WPA PSK
WPA PSK configuration menu allows automatic key generation based on a single passphrase. WPA PSK
provides very strong security, but may not be supported on older systems.
If you configure the M2900 AP with WPA-PSK, the other devices in the network will not connect unless
they, too are set to WPA-PSK, and are configured with the same passphrase.
1. Click the Configuration -Wireless link in the left-hand navigation pane.
2. Select WPA-PSK in the Security drop-down menu.
3. Click the Edit Security Settings button.
4. In the Configuration ->Security (WPA-PSK) menu, enter a passphrase and enter it again in the Confirm
field.
5. Click the Update button to save your settings.
PassPhrase This allows automatic key generation. Enter the desired passphrase and click on the
Generate button. The system will generate all four WEP keys automatically.
Default Shared Key The default share key number. There are four shared keys; select one of these keys as the
default.
Encryption Keys These fields auto-fill if you use a passphrase to generate keys.
If your network doesn’t use Video54, Inc. APs or adapters, enter each key manually
according to the Key Entry Methods and Key Length settings. You may specify up to four
different keys and select the desired default shared key.
Table 10—WEP Configuration (Continued)