User's Manual

Ruckus Wireless ZoneFlex 2925/2942/7942 User Guide | Installation, Setup, and Placementof the AP

4 Using the AC adapter included in the package, connect the AP to a convenient (and

protected) power source. After a minute, verify that the AP’s Power LED is a steady

green.

1 On your Windows 2000 or XP PC, open the Network Connections (or Network and Dial-

up Connections) control panel according to how the Start menu is set up:

• Start-> Settings-> Network Connections

• Start-> Control Panel-> Network Connections

2 When the Network Connections window appears, right-click the icon for “Local Area

Connection” and choose Properties.

3 When the Local Area Connection Properties dialog box appears, select Internet Proto-

col (TCP/IP) from the scrolling list, and click Properties.

The TCP/IP Properties dialog box appears.

4 Select Use the following IP address (if it’s not already active) and make the following

entries:

IP Address 192.168.0.22 (or any address in the 192.168.0.x net-

work—with the exception of 192.168.0.1, which is

already used by the AP)

Subnet mask 255.255.255.0

Default gateway 192.168.0.1

Preferred DNS server 192.168.0.1

• You can leave the Alternate DNS server field empty.

5 Click OK to save your changes and exit first the TCP/IP Properties dialog box, then the

Local Area Connection Properties dialog box.

Your changes are put into effect immediately.

As specified earlier, the AP should be directly connected to your PC/laptop (through one of

the LAN ports), and have been powered up, ready for setup.

1 Verify that the AP’s Power LED is a steady green.

2 On the PC, open a web browser window.

3 In the browser, type the following IP address to connect to the AP:

2 Preparing your PC for AP Setup

ALERT

Make sure you don’t open the Properties dialog box for the wireless network.

NOTE

IMPORTANT!—Write down all of the currently active settings so you can restore your com-

puter to its current configuration when this process is complete.

3 Logging into the AP