User's Manual

Ruckus Wireless ZoneFlex 2925/2942/7942 User Guide | After the Installation (Post-Installation Setup)

4 Review the following options and make any needed changes:

Data Beacon Rate (The default value is 10.) The value indicates the interval of the

Delivery Traffic Indication Message (DTIM). This is a countdown

field that the device uses to inform its clients of the next win-

dow for listening to broadcast or multicast messages.

Fragment Threshold (The default value is 2346.) This option sets the maximum

length of a packet before data is fragmented into multiple pack-

ets. In a good wireless environment, the larger the fragment,

the more efficient the network operates. In a noisy environ-

ment, the threshold should be adjusted to a smaller size to min-

imize retransmission and increase the reliability of the

transmission.

RTS/CTS Threshold (The default value is 2346.) This option determines at what

packet length the RTS/CTS function is triggered. A lower thresh-

old may be necessary in environment with excessive signal noise

or hidden nodes; but may result in some performance degrada-

tion.

5 Click Update Settings to save and apply the changes.

A confirmation message appears at the top of this workspace.

6 Click Go back to Wireless Configuration to reopen the previous workspace.

Customizing Wireless Hotspot Settings

1 After opening the Web User interface, click Wireless under Configuration.

2 When the Configure::Wireless::Common workspace appears, click one of the four

Wireless (#) tabs.