User's Manual

Ruckus Wireless ZoneFlex 2925/2942/7942 User Guide | Managing the Access Point

Changing the Wireless Data Rate

1 After opening the Web User interface, click Wireless under Configuration.

2 When the Configure::Wireless::Common workspace appears, click Edit Common Set-

tings.

3 When the Configure::Wireless::Advanced::Common workspace appears, review the

options.

4 Open the Data Rate menu and make a selection. (The default value is Best.)

5 Select the preferred rate of data transmission from the drop-down menu.

• Selecting Best allows the AP to adapt data transmission to the best rate available.

• Note: the efficacy of rates listed in the Data Rate drop-down menu is dependent on

the Wireless Mode previously specified.

6 Click Update Settings to save and apply the changes.

Changing the Transmit Power Setting

1 After opening the Web User interface, click Wireless under Configuration.

2 When the Configuration::Wireless::Common workspace appears, click Edit Common

Settings.

3 When the Configure::Wireless::Advanced::Common workspace appears, review the

available options.

4 Open the Transmit Power menu and make a selection. (The default is Full.)

5 Select the level of transmit power from the drop-down menu. This option sets the

maximum transmit power level relative to the calibrated power.

6 Click Update Settings to save and apply the changes.

FIGURE 4-2:

FIGURE 4-3: