User's Manual

Ruckus Wireless ZoneFlex 2925/2942/7942 User Guide | Managing the Access Point
50
1 After logging into the Web User interface, click VLAN under Administrator.
The Administrator::VLAN workspace appears.
2 Clear the value in the VLAN ID column, and type the new value.
3 Click Update Settings (test) to verify connectivity prior to saving changes. This pre-
vents you from being locked out in the event you were to change the Management
interface VLAN ID.
Changing the port state for a VLAN
This task should be performed by an experienced network administrator or are under the guidance of an IT/support
professional.
1 After logging into the Web User interface, click VLAN under Administrator.
The Administrator::VLAN workspace appears.
2 Click a green check mark to change the state between member, non-member, or
tagged member.
3 Click Update Settings (test) to verify connectivity prior to saving changes. This pre-
vents you from being locked out in the event you were to change the Management
interface VLAN ID.
Changing an RJ45 port’s VLAN tagged state
This task should be performed by an experienced network administrator or are under the guidance of an IT/support
professional.
1 After logging into the Web User interface, click VLAN under Administrator.
The Administrator::VLAN workspace appears.
2 Click an RJ-45 port icon to change the state from untagged to tagged.
3 Click Update Settings (test) to verify connectivity prior to saving changes. This pre-
vents you from being locked out in the event you were to change the Management
interface VLAN ID.
ALERT
This works best in conjunction with “Changing the port state for a VLAN” and “Changing an
RJ45 port’s VLAN tagged state” for individual state changes.
ALERT
This works best in conjunction with “Changing a VLAN ID” and “Changing an RJ45 port’s
VLAN tagged state” for individual state changes.
ALERT
This works best in conjunction with “Changing a VLAN ID” and “Changing the port state for
a VLAN” for individualized state changes.