User's Manual

Ruckus Wireless ZoneFlex 2925/2942/7942 User Guide | Monitoring Activity in the Access Point
58
Reviewing the Latest Log File Entries
The Log screen shows the log messages kept by the Ruckus Wireless Router since it was
rebooted. The log has limited size: the oldest messages are replaced as new messages
arrive.
1 After logging into the Web User interface, click Log under Administrator.
The Administrator::Log workspace appears.
The current log contents are displayed in a frame inside the workspace. The most
recent entries are shown in chronological order, with the most recent entries being at
the top of the log frame.
2 After reviewing the log file contents, you can save a copy of the log file to your local
PC, if needed. For more information, see the following section.
Sending a Copy of the Log File to Support Staff
The Support Info log consists of the configuration and run-time status of the Ruckus Wireless
AP and can be useful for troubleshooting.
You have three options for sending a copy of the Current Log file to support staff:
• Save a copy to your local PC, then attach it to an e-mail message and send it to support
• Set up a connection to an FTP site
• Set up a connection to a TFTP site
To take advantage of these options, follow these steps
1 After logging into the Web User interface, click Support Info under Maintenance
ALERT
if you have not previously activated the AP log function, you will need to do so now as there
will be no entries in the log file. For more information see the previous section.