Installation Guide
Table Of Contents
- Contents
- 1 About this Installation Guide
- 2 Planning the SC8800-S AP Installation
- 3 Preparing the SC8800-S AP at the Depot and Shipping to the Field
- 4 Installing the SC8800-S AP in the Field
- Installation Components and Constraints
- Deploying the Access Point
- Mounting the Access Point
- Mounting the U-Joint Bracket to the Main Mounting Bracket
- Attaching the Main Mounting Bracket to a Flat Surface
- Attaching the Main Mounting Bracket to a Wooden Pole
- Attaching the Main Mounting Bracket to a Metal Pole
- Mounting the Hook Bracket to the U-Joint Bracket
- Assembling the AP Attachment Bracket and the Access Point
- Attaching the AP Attachment Bracket and AP to the Hook Bracket
- Safety-Cabling the AP
- Mounting External Antennas (Optional)
- Verifying Access Point Operation
- 5 What to Do Next
- Appendix A: Ruckus Wireless-Supplied and Customer-Ordered Parts
- Appendix B: Resetting the Access Point to Factory Default Settings
- Appendix C: Installer Mounting Dimensions
41
Installing the SC8800-S AP in the Field
Mounting the Access Point
Figure 22. Wooden Pole Mounting Hole Locations
3. Remove the main mounting bracket from the pole.
4. Drill holes for the carriage bolts as required by the local pole owner.
5. Attach the main mounting bracket to the flat surface using the carriage bolts. Note the
UP direction.
6. Using carriage bolt nuts, tighten the carriage bolts as required by the local pole owner
to secure the main mounting bracket.
7. Continue with “Mounting the Hook Bracket to the U-Joint Bracket”
on page 43.
Table 12. Main Mounting Bracket Carriage Bolt Holes
No. Interface Element Description
1Square Holes
(2 places)
Designed for use with two customer-supplied M16 (5/8”)
carriage bolts.
1
UP