Installation Guide
Table Of Contents
- Contents
- 1 About this Installation Guide
- 2 Planning the SC8800-S AP Installation
- 3 Preparing the SC8800-S AP at the Depot and Shipping to the Field
- 4 Installing the SC8800-S AP in the Field
- Installation Components and Constraints
- Deploying the Access Point
- Mounting the Access Point
- Mounting the U-Joint Bracket to the Main Mounting Bracket
- Attaching the Main Mounting Bracket to a Flat Surface
- Attaching the Main Mounting Bracket to a Wooden Pole
- Attaching the Main Mounting Bracket to a Metal Pole
- Mounting the Hook Bracket to the U-Joint Bracket
- Assembling the AP Attachment Bracket and the Access Point
- Attaching the AP Attachment Bracket and AP to the Hook Bracket
- Safety-Cabling the AP
- Mounting External Antennas (Optional)
- Verifying Access Point Operation
- 5 What to Do Next
- Appendix A: Ruckus Wireless-Supplied and Customer-Ordered Parts
- Appendix B: Resetting the Access Point to Factory Default Settings
- Appendix C: Installer Mounting Dimensions
45
Installing the SC8800-S AP in the Field
Mounting the Access Point
Attaching the AP Attachment Bracket and AP to the Hook
Bracket
1. Slide the AP attachment bracket and AP assembly onto the hook bracket.
CAUTION: MAKE SURE that the AP attachment bracket slides securely onto the hook
bracket.
2. Finger-tighten the two hook bracket captive screws to secure the AP attachment
bracket and AP.
Figure 27. AP Attachment Bracket and AP Attached to the Hook Bracket
3. Continue with “Safety-Cabling the AP”
on page 46.