Installation Guide
Table Of Contents
- Contents
- 1 About this Installation Guide
- 2 Planning the SC8800-S AP Installation
- 3 Preparing the SC8800-S AP at the Depot and Shipping to the Field
- 4 Installing the SC8800-S AP in the Field
- Installation Components and Constraints
- Deploying the Access Point
- Mounting the Access Point
- Mounting the U-Joint Bracket to the Main Mounting Bracket
- Attaching the Main Mounting Bracket to a Flat Surface
- Attaching the Main Mounting Bracket to a Wooden Pole
- Attaching the Main Mounting Bracket to a Metal Pole
- Mounting the Hook Bracket to the U-Joint Bracket
- Assembling the AP Attachment Bracket and the Access Point
- Attaching the AP Attachment Bracket and AP to the Hook Bracket
- Safety-Cabling the AP
- Mounting External Antennas (Optional)
- Verifying Access Point Operation
- 5 What to Do Next
- Appendix A: Ruckus Wireless-Supplied and Customer-Ordered Parts
- Appendix B: Resetting the Access Point to Factory Default Settings
- Appendix C: Installer Mounting Dimensions
2
About this Installation Guide
Using this Installation Guide
NOTE: The AP can be managed using an AP web browser interface, an AP command line
interface (CLI), and using a simple network management protocol (SNMP) interface, such
as Ruckus Wireless ZoneDirector
TM
or FlexMaster
TM
. This document contains configuring
instructions using these interfaces, as appropriate.
Table 1. Adding an SC8800-S AP to an Existing Ruckus Wireless network
Section Heading
2 Planning the SC8800-S AP Installation
•About the AP
• AP Connectors and LEDs
• Pointing the Internal GPS Antenna
• Performing a Site Survey
• Planning the Physical Installation
3 Preparing the SC8800-S AP at the Depot and Shipping to the Field
• Unpacking the AP
• Powering the AP
• Configuring the AP for Management by ZoneDirector
• Configuring the AP for Management by FlexMaster or for Standalone
Operation
• Verifying AP Operation
• Shipping the AP to the Field
4 Installing the SC8800-S AP in the Field
• Installation Components and Constraints
• Deploying the AP
• Mounting the AP
• Verifying AP Operation
5 What to Do Next
• Changing the Administrative Password
• Configuring the Security Settings
• Configuring Advanced Settings and Features
• Reading Related Documentation