Step-by-step Instructions
Table Of Contents
Step 8: Earth Grounding the AP
CAUTION! Using the factory-supplied ground wir
e and ground
screw/washer set, connect a good earth ground to the AP
chassis ground point (Figure 12).
NOTE: The color coding of ground wir
es varies by region.
Before completing this step, check your local wiring standards
for guidance.
Using the factory-supplied ground wire and ground screw/
washer set, connect a good earth ground to the AP chassis
gr
ound point (Figure 12).
CAUTION! The Q910 AP includes one 12 mm stainless
steel M6x1 earth ground scr
ew with split lock and at
washers. Make sure that any replacement screw is no
longer than 12 mm. If a screw is longer than 12 mm, it can
damage the AP chassis.
FIGURE 12 Connect good earth ground to AP her
e
Step 9: Installing the Security Cable
1. Thr
ead the security cable through the mounting bracket (A)
and through the eye on the cable itself (B), as shown in
Figure 13.
2. Attach the safety cable to the AP (C) in Figure 13.
FIGURE 13 Attaching the Security Cable
Step 10: Checking the LED Lights
The LED lights verify the installation of AP
.
Once connected, AP will po
wer on and automatically connect to
Ruckus Cloud over the Internet to congure itself. You will see
some activity and after 5-10 minutes all lights should turn solid
Green or solid Amber (LTE LED).
If any light is o or ashing, see the following table to help you
troubleshoot the issue.
Light Troubleshooting Action
PWR Check Power, Ethernet connections and PoE
(802.3at Type-2 (PoE+) Certied) switch.
EMS
Check Internet connection and network/
rewall settings.
EPC Check Internet connection and network/
rewall settings.
SYNC Ensure at least one AP in the network is near
an unobstructed window for a good GPS
signal.
LTE For additional guidance, use the Ruckus Cloud
or contact Customer Support.
For more Information
The AP is now operational and can be further managed by the
Ruckus Cloud service. For more information, refer to the
appropriate Ruckus Wireless Cloud documentation or visit
http://support.ruckuswireless.com
©
2018 ARRIS Enterprises LLC. All rights reserved.
ARRIS, the ARRIS logo, Ruckus, Ruckus Wireless, the Ruckus logo, and
the Big Dog design are trademarks of ARRIS International plc and/or
its aliates. All other trademarks are the property of their respective
owners.
Copyright
©
2018 ARRIS Enterprises LL
C. All rights reserved. Page 4 of 4
Published December 2018, Part Number 800-71412-001 Rev B