Manual

28
MAINTENANCE OF
STAINLESS STEEL RIFLES
Firearms and components made of stainless steel are relatively more resistant to
corrosion than those of blued steel. However, in the interest of proper operation
and long life of a stainless steel firearm, inspect it frequently and clean, lubricate
and apply an appropriate rust preventative.
Sometimes discoloration occurs from perspiration or from contact with some
types of gun cases. Rusting may occur as a result of the firearm being exposed to
moisture, salt air or chemicals.
Minor discoloration can usually be removed by rubbing the stainless area with
an abrasive ink eraser, crocus cloth, or a “metal polishing” compound. When
using any of these abrasives, proceed with care and use light pressure to achieve
a blending of “color” with those areas that are not discolored.
External surfaces most subject to rusting from handling, or from exposure to the
elements should be cleaned and wiped dry after use or after exposure to adverse
conditions. If the rifle is to be stored, coat it with a light film of oil or preserva-
tive. Where the rifle is in continuing use, and the presence of oil or grease would
be objectionable, then the external surfaces can be coated (after cleaning and
drying) with a paste wax formulated for use on metals. Apply the wax sparingly,
allow time for it to dry hard, then buff lightly with a soft cloth. When applying
the wax, take care that it does not get into the mechanism or on the functioning
parts or in the bore.