Manual

ORDERING PARTS

Please contact the New Hampshire Product Service Department for parts avail-

ability and current prices. All parts orders for the MODEL 77/22

, MODEL

77/17, or MODEL 77/44

should be sent to: Sturm, Ruger & Co., Inc.,

Product Service Department, 411 Sunapee Street, Newport, New Hampshire,

03773, (603) 865-2442.

We cannot comply with open account or C.O.D. requests. Payment in the form of

a check, money order, Visa or Mastercard must accompany your order. Credit

Card orders must include the account number, expiration date and whether it is

a Visa or Mastercard account. Minimum parts order is $1.00 plus a $3.50 ship-

ping and handling charge. Order parts by Part Number and Part Name and

include the entire serial number of the firearm for which the parts are being

ordered. There is a minimum net labor charge of $20.00 plus $12.00 shipping

and handling charge if the parts are factory fitted. All factory-fitted parts are fit-

ted on an exchange basis only. We will not return the replaced parts.

Because the receiver of the MODEL 77/22

, MODEL 77/17, and

MODEL 77/44

rifles is a serial numbered component, it is defined as a

“firearm” by Federal law and is not sold as a separate component.

*Parts designated by an asterisk must be factory fitted. These parts are fitted on

an exchange basis only. We will not return the replaced parts. We will not return

any part that is broken, malfunctioning, badly worn or has been modified. See

“Warning — Parts Purchasers”, above.

CAUTION: A gun containing modified, broken, malfunctioning,

or badly worn parts should not be fired.

WARNING –PARTS PURCHASERS

It is the purchaser’s responsibility to be absolute-

ly certain that any parts ordered from the factory

are correctly fitted and installed. Firearms are

complicated mechanisms and IMPROPER FIT-

TING OF PARTS MAY RESULT IN A DANGER-

OUS MALFUNCTION, DAMAGE TO THE

FIREARM, AND SERIOUS INJURY TO THE

SHOOTER AND OTHER PERSONS. The purchas-

er and installer of parts must accept full responsi-

bility for the correct adjustment and functioning

of the firearm after such installation.

PARTS MUST FIT CORRECTLY