Instruction Manual

26
SIGHT PICTURE AND ADJUSTMENT FOR
ALASKAN AND AFRICAN MODELS ONLY
Both the Ruger “Alaskan” and “African” bolt action rifles are equipped with a
fixed elevation rear sight set for approximately 50 yards.
Lateral (windage) adjustment is made by loosening the rear sight blade lock
screw (located in front of the rear sight blade) and carefully moving the blade in
the direction you wish to move the bullet's point of impact. Tighten the screw
securely before shooting the rifle. Repeat as necessary until the rifle is zeroed.
SIGHT PICTURE FOR “ALASKAN”
AND “AFRICAN” MODEL
Front sight bead center in
V-notch of rear sight. Target
placed directly above bead.