Manual

Store the pistol’s frame and the barrel/slide assembly in different locations. When

disassembled in this manner, this pistol is inoperable. It is impossible to fire the

pistol until the barrel/slide assembly and frame have been correctly reassembled.

To reassemble the pistol for firing, carefully slide the barrel/slide assembly onto

the frame. Align the disassembly marks on the frame and slide, and then push

the slide stop pin fully into the receiver from the left. Either reinsert an empty

magazine or lock the slide open and push the ejector back upward and rearward

with a finger. The pistol is now reassembled and can be loaded and fired normal-

ly.

While the pistol is less likely to be used by unauthorized persons when disas-

sembled in the above manner, it is always safest to store any firearm with the

supplied locking device correctly installed, or to store the firearm in a gun safe

or other secure location away from children and unauthorized adults. Guns

should always be stored securely, unloaded

and separate from their ammuni-

tion.

Never place or store any firearm in

such a manner that it may be dis-

lodged. Firearms should always be

stored securely and unloaded, away

from children and careless adults. Use

the locking device originally supplied

with this firearm for storage.

The use of a locking device or safety

lock is only one aspect of responsible

firearms storage. For increased safety,

firearms should be stored unloaded and

locked in a location that is both sepa-

rate from their ammunition and inac-

cessible to children and any other

unauthorized person.

STORE SECURELY & UNLOADED

WARNING –STORAGE