User Manual

5
Before You Start
Before you install one of the included
eyepiece assemblies, you will need to
determine which one fits your camera.
The rain cover comes with three sizes of
eyepiece assembly (small, medium, and
large).
1. Remove your camera’s eyepiece by
pinching the eyepiece and pulling it up
and o your camera’s viewfinder.
2. Mount one of the included eyepiece
assemblies by sliding the eyepiece
onto your camera’s viewfinder until it
locks into place. Repeat this process as
necessary until you find the eyepiece
that best fits, and then remove it from
your camera.