Users Manual

16 17
Menu Operation Detailed Function Descriptions
1) In standby mode, press [ ] to enter menu setting. The LCD will display "MENU."
2) Press [ ] or [ ] to select the desired menu item. The LCD will display the current setting of
the selected item.
3) Press [ ] to enter, and then press [ ] or [ ] to select the desired setting.
4) Press [ ] to confirm.
5) Press [ ] twice to exit and return standby mode.
1) Scan & Scan Mode setting (SCAN)
Functions: Under VFL/MR mode, GMR5-M allows you to scan the entire current operating band
and memory channels.
2) Squelch Adjustment (SQL --- MENU 2)
Enter Menu 1st and press [ ] key to start scanning.
When you have started scanning, press [ ] / [ ] key to change direction. The radio will halt
on a signal it encounters. Press PTT key to stop scanning. Press MONI key to stop scanning
temporarily. Press [ ] key again to exit the scanning function.
Functions: The GMR5-M Squelch system allows you to mute background noise when no signal is
being received. The Squelch system significantly reduces battery consumption.
Enter Menu 2 to set SQL level. Default: 5
3) Dual Wait/Standby (DUALDSP --- MENU 6)
4) LED Display Mode (LED --- MENU 4)
Functions: Receive a sub band signal even while working on the operating band. Monitor signals
under both master and sub bands at the same time.
Functions: Select the LED/Keypad Lamp mode.
Enter Menu 4 to select LED display mode. Default: AUTO
Enter Menu 3 to set Dual Wait. Default: ON