User guide

Installation
17
RuggedCom
®
RuggedServer™ RS416 Family Installation Guide rev118
2.2.1 AC Power Supply Wiring Examples
Figure
9
:
AC Single Power Supply Wiring
Example
Figure
10
:
AC Dual Redundant Power Supply
Wiring Example
NOTES:
1. 100-240VAC rated equipment: A 250VAC appropriately rated circuit breaker
must be installed.
2. Equipment must be installed according to the applicable country wiring codes.
3. When equipped with two HI voltage power supplies, independent AC sources
can be used to power the product for greater redundancy. However, separate
circuit breakers must be installed and separately identified (not shown in above
figure).