User's Manual

RuggedSwitch™ User Guide
Summary Of Commands
The shell makes available the following commands.
Command Accessible By Description
Alarms Guest, Operator, Admin Displays alarms available in the switch.
Cls Guest, Operator, Admin Clears the screen.
Dir Guest, Operator, Admin Prints file directory listing.
Echo Guest, Operator, Admin Echoes the specified message to the screen.
Exit Guest, Operator, Admin Terminate this command line session.
Help Guest, Operator, Admin Print listing of all commands.
Ipconfig Guest, Operator, Admin Displays IP configuration.
login Guest, Operator, Admin Login to the shell i.e. set the access level.
logout Guest, Operator, Admin Logout of the shell.
ping Guest, Operator, Admin Pings specified IP address.
rmon Guest, Operator, Admin Displays names of RMON alarm eligible objects.
telnet Guest, Operator, Admin Telnet to the server with specified IP address.
tftp Guest, Operator, Admin TFTP client.
type Guest, Operator, Admin Displays the contents of a text file.
version Guest, Operator, Admin Prints software versions.
xmodem Guest, Operator, Admin Upload or download a file to the switch.
clearalarms Operator, Admin Clears all alarms.
clearlogs Operator, Admin Clears the system and crash logs.
loop Operator, Admin Starts a loopback test on the desired port(s).
reset Operator, Admin Perform a 'hard' reset of the switch.
resetport Operator, Admin Resets specified switch port(s).
trace Operator, Admin Trace command.
delay Admin Pause a specified number of milliseconds.
sql Admin SQL like commands for setting/viewing parameters
Note that this chapter describes only the most useful of the above commands.
RuggedCom