User's Manual

RuggedSwitch™ User Guide
APPENDIX B - SNMP MIB SUPPORT
RFC MIB Name Items supported
RFC 1907 SNMPv2-MIB SNMP Group
SNMP Community Group
SNMP Set Group
System Group
SNMP Basic Notifications Group
RFC 2863 IF-MIB General Information Group
VHC Packet Group
Counter Discontinuity Group
Link Up/Down Notification Group
RFC 2012 TCP-MIB TCP Group
RFC 2013 UDP-MIB UDP Group
RFC 2819 RMON-MIB Ethernet Statistics Group
History Groups (History Control Group and
Ethernet History Group)
Alarm Group
Event Group
Draft-ietf-bridge-bridgemib-smiv2-03 RSTP-MIB Base Bridge Group
Base Port Group
STP Bridge Group
STP Port Group
TP Bridge Group
TP FDB Group
TP Group
Notification Group
Draft-ietf-bridge-rstpmib-03 BRIDGE-MIB Bridge Group
Default Path Cost Group
Port Group
APPENDIX C – SNMP TRAP SUMMARY
The switch generates the standard traps summarized in the following table.
SNMP Trap Name Source MIB Configurable From
linkDown, linkUp IF-MIB Port Configuration and Status Menu, Configure
Port Parameters, Link Alarms Parameter
authenticationFailure SNMPv2-MIB Not Configurable (always generated)
warmStart SNMPv2-MIB Not Configurable (always generated)
newRoot BRIDGE-MIB Not Configurable (always generated)
topologyChange BRIDGE-MIB Not Configurable (always generated)
risingAlarm RMON-MIB Configure RMON Alarms Menu
fallingAlarm RMON-MIB Configure RMON Alarms Menu
The switch also generates the proprietary traps summarized in the following table.
These traps are described in the RC-TRAPS-MIB.
SNMP Trap Name
GenericTrap (String “Stack overflow”)
GenericTrap (String “Heap error”)
GenericTrap (String “PowerSupplyFailure”)
GenericTrap (String “Broadcast Storm Filtering activated on port”)
GenericTrap (String “Received frame on interface it was sent on, potential hardware loop”)
GenericTrap (String “Received two consecutive confused BPDUs on this port, forcing down”)
GenericTrap (String “Unauthorized MAC address is detected on secure port”)
RuggedCom