User's Manual
Table Of Contents
- About this User Guide
- Table Of Contents
- Chapter 1– Setting Up And Administering The Switch
- Chapter 2 - Configuring MAC Address Management
- Chapter 3 – Configuring the Ports
- Chapter 4 – Configuring VLANs
- Chapter 5 – Configuring Class of Service
- Chapter 6 – Configuring Rapid Spanning Tree
- Chapter 7 – Configuring Multicast Filtering
- Chapter 8 – Diagnostics
- Chapter 9 – Using Ethernet And RMON Statistics
- Introduction
- View Ethernet Statistics
- View Ethernet Port Statistics
- Remote Monitoring (RMON)
- RMON Historical Statistics Concepts And Issues
- RMON Alarms And Events Concepts And Issues
- The Alarm Process
- Alarm Generation And Hysteresis
- Delta vs. Absolute Values
- Configure RMON Alarms
- Configure RMON Events
- RMON Event Logs
- Troubleshooting
- Chapter 10 - Using The CLI Shell
- Chapter 11 – Upgrading Firmware And Managing Configurations
- Appendix A - Menu Tree
- Appendix B - SNMP MIB Support
- Appendix C – SNMP Trap Summary
- Appendix D – RMON Acceptable MIB Parameters
- Index
Chapter 4 – Configuring VLANs
VLAN 3
VLAN 4
VLAN 2
199.85.245.1/25
199.85.245.128/26
199.85.245.192/26
IP Addresses
:
VLAN 2 – 199.85.245.0 - 199.85.245.127
VLAN 3 – 199.85.245.128 - 199.85.245.191
VLAN 4 – 199.85.245.192 - 199.85.245.255
Server, Router or
Layer 3 Switch
Switch
Figure 19: Inter-VLAN Communications
Service Differentiation
Programming of priority field in the VLAN tag can be used to provide classes of
service in the network. See Chapter 5 for information on configuring CoS.
VLAN Configuration
VLAN Parameter Ranges & Default Settings
The following set of tables lists default VLAN configuration parameters for the
unit. For each parameter the parameter name, recommended setting and possible
range are included.
Configuration Items (All Ports) Default Value Supported Values
Configured VLANs 1 (Management VLAN) 1-1000
Port VLAN Type Edge Port Edge Port, Trunk Port
Port native VLAN (PVID) 1 1-1000
Port native VLAN format Untagged Untagged, Tagged
RuggedCom
29